DM74ALS174SJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DM74ALS174SJ is a type of logic flip flop designed to quickly respond to pulses and hold a signal value. It is a form of positive-edge-triggered (asynchronous) D type flip flop, which, when activated, stores a data bit on a master-slave arrangement of two connected NAND gates. It can be used as a simple one-bit memory device or in a multi-bit arrangement to create a RAM. The device includes an active low enable input, a data input, and a data output. It can also be used as frequency divider, edge detector and as a one-bit arithmetic/logic unit.

The basic function of a D type flip flop is to store the data bit and hold the data bit in its set state until a new bit is sent. The DM74ALS174SJ works by having two NAND gates connected in a master-slave format, known as the master-slave D latch. With this arrangement, the output of the first gate, the master, becomes the output of the latch as well as the input to the second gate, the slave. When the clock input is activated, the master toggles, which in turn causes the slave to toggle, and the latch changes state. It is an active low type of flip flop, meaning that the clock input must be taken to logic low level in order to make the required state change.

The DM74ALS174SJ is a true positive-edge-triggered flip flop, meaning that the latch will change state only on the rising edge of the clock signal. This means that in order for the device to respond to a pulse, the pulse must go from low to high. This can be used to count the number of pulses received by the device using a simple logic circuit. In addition, the device includes a preset and clear inputs, which are used to reset or clear the device before or after a new cycle is started.

The DM74ALS174SJ can be used in a wide range of applications, including as an edge detector, a frequency divider, or a one-bit arithmetic/logic unit. Its use as an edge detector is based on the fact that it can detect whether the clock pulse is rising or falling. This can be used to provide an indication of when a change in the value of the data bit starts. When used as a frequency divider, the device can detect high frequency signals and divide them into lower frequency pulses. Finally, it can be used as a one-bit arithmetic/logic unit by using the properties of logic gates together with the data output to perform various logic functions, such as addition, subtraction, and multiplication.

In conclusion, the DM74ALS174SJ is a powerful D type flip flop which can be used in a wide range of applications. Its master-slave arrangement and positive-edge-triggered design allow it to quickly respond to pulses and store a data bit, while its preset and clear inputs provide additional control over the device. In addition, its versatility allows it to be used as an edge detector, frequency divider, or one-bit arithmetic/logic unit, depending on the requirements of the application.

The specific data is subject to PDF, and the above content is for reference