DM74S112N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A logic flip-flop is an electronic device which stores the binary information about a signal that has been applied. It is an electronic circuit that can store two separate pieces of electronic data and is used in the design of a wide range of digital systems. One of the most common types of logic flip-flop is the DM74S112N. The DM74S112N has a set of inputs and outputs, as well as logic gates which determine the behavior of the device when a signal is applied.

The DM74S112N has a data input terminal and a data output terminal. The data input terminal is where the signal to be stored is applied. The signal is processed by the logic gates, and the output is dependent on what is applied to the input. The data output terminal is where the processed information is sent to. The output will be either a 1 or 0, depending on what was applied to the input.

The DM74S112N also has various control signals which are used to control its behavior when the input signal is applied. The S (set) and R (reset) inputs control if the device is in its set or reset state. The CLK (clock) input is used to synchronize the actions of the device. The CLK signal is used to decide when to set or reset the device and when to output data. The enable (E) input is used to enable or disable the device. When the enable input is set to a 0, the device is disabled and no data is output.

The application field of the DM74S112N is very broad. It is used in digital circuits such as counters and registers, as well as being used in memory devices, arithmetic units and control logic. The DM74S112N is also used in many automotive and domestic applications, such as controlling the logic used in car windshield wipers and domestic security systems.

The working principle of the DM74S112N is based on the fact that it is a Combinational Logic Device. It stores the binary information that is applied to its input and outputs the corresponding binary information at its output. The DM74S112N has various control signals that are used to control the behavior of the device when an input signal is applied. The S (set) and R (reset) inputs control if the device is in its set or reset state, the CLK (clock) input synchronizes the device’s actions and the E (enable) input is used to enable or disable the device.

In conclusion, the DM74S112N is a logic flip-flop device which is used in a wide range of digital systems. It is a combinational logic device which is used to store binary information. It has a variety of control signals which can be used to control its operation and is used in many automotive and domestic applications.

The specific data is subject to PDF, and the above content is for reference