DM74S113N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DM74S113N is a type of logic flip-flop that is commonly used in digital electronics applications. It is a dual-input positive-edge triggered D flip-flop, meaning that the trigger input is positive going and that the output state is determined by the inputs at the triggering moment. It is part of the popular 74 Series of devices, which all are divided in to two main sub-categories, the "S" and "AS" family. The “S” family is suitable for most applications, while the “AS” version is faster. As for the DM74S113N, it has a typical propagation delay of 2.3ns (for the non-clocked version) and 1.4ns for the clocked version.

Generally, logic flip-flops are used to store and transfer digital information from one point to another. They are used in a variety of applications, such as sequential logic, computer memory, and timing circuits. The DM74S113N can be used in any of these applications, as it provides reliable and consistent output with a maximum low power consumption.

The DM74S113N is comprised of two SET and RESET inputs and two outputs, Q and Q~. The inputs may be either active-high or active-low, meaning that a logic high or low can be used to set or reset the device respectively. It features an up/down configuration, meaning that if both inputs are high, the output if Q is high and the output of Q~ is low. If both inputs are low, then the outputs are the opposite of what they were previously.

In addition to its up/down configuration, the DM74S113N also features two operating modes, assume and toggle. In assume mode, the output will assume the state of the inputs when both SET and RESET are simultaneously active and remain there for any subsequent triggers. In the toggle mode, the output will toggle between the two possible states whenever both SET and RESET inputs are simultaneously active.

The operation of the DM74S113N is relatively simple and is fully exposed through its SET and RESET input ports. A logic high at either of the inputs will result in the corresponding state of the output. If both inputs are high, then the output will assume the state of the inputs and remain that state until a logically opposite input is received. The same happens if both inputs are low.

The DM74S113N is a versatile device that can be used in a number of applications. It is mainly used as a data transfer device, where the inputs of the flip-flop are the source of incoming data and the outputs are used to transfer the data to any destination. It is also widely used in timing circuits, where the SET and RESET inputs can be configured to produce certain output waveforms based on an input clock.

As mentioned before, the DM74S113N is part of the 74 Series of devices, which is one of the most popular and widely used type of logic IC. This makes finding and obtaining the necessary components relatively easy and cost-effective.

In conclusion, the DM74S113N is a powerful and cost-effective device for any digital electronic application where logic data transfer and storage is needed. Due to its versatility and flexibility, it can handle a wide variety of tasks with minimal power consumption and reliable operation.

The specific data is subject to PDF, and the above content is for reference