DM74S174N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DM74S174N, classified as a part of the Logic - Flip Flops components, is a 4-Bit counter chip. It is manufactured by the global electronic parts supplier, Texas Instruments. This device performs a variety of functions, including multiplexing, demultiplexing and data conversion, along with frequency measuring and signal processing.

The external environment of the chip contains four core input pins and four control inputs. There are also four data outputs and two status outputs –parallel load (/PL) for initiation, asynchronous clear (/CLR) to reset, count enable input (/CE) to begin counting, a clock input (/CK) as an initial signal, and clock inhibit input (/CI) to suspend the count. Furthermore, a trailing-edge (TE) signal detects when the count is equal to the maximum value and a signal is outputted at the end of the cycle.

The DM74S174N is a count-up and count-down synchronous binary counter which can count from zero to the maximum value. Its logic circuit is designed to sequentially count up the four data outputs at every positive transition of the clock input. The counter can also count down when it is enabled with the CLK_INHIBIT and the CLK_ENABLE input. The flip flop will reset to 0 when the CLR input has a low signal.

The applications for this chip are abundant as it is capable of multiplexing, demultiplexing, data conversion, frequency measurement, and timing control. For example, it can be used in laboratory settings to measure waveforms, measuring waveform components magnitude, analyzing waveforms characteristics, estimating the speed of an engine or a motor, or decoding logic signals.

In terms of communication systems, the DM74S174N can be used to measure the time interval between two events, and even act as a bit counter. This chip is also capable of encoding/decoding digital data, generating a pulse width modulated waveform, creating waveforms with specific frequencies, analyzing the jitter of an oscillator, or converting an asynchronous distributor into a synchronous one, among many other functions.

In terms of circuit design, the DM74S174N follows the familiar logic circuit design principles. It is based on the T-type Flip Flop logic. It can be designed in several ways to suit different purposes: as a 4-bit synchronous binary counter, as a 3-bit synchronous binary counter and a paralleling output, or as a 4-bit synchronous binary counter with dual complementary outputs. Furthermore, it has several storage elements that include Flip Flops, which can hold a bit of data and control the output. Flip Flops are the most common type of storage element used in digital circuits.

In conclusion, the DM74S174N chip is a useful component of the Logic - Flip Flops category in the electronic parts world. Its versatile applications and logic circuit design make it suitable for a wide range of uses in electronic projects. Furthermore, its design principles and components such as Flip Flops, multiplexing and data conversion, are widely understood and used to design digital circuits in various systems.

The specific data is subject to PDF, and the above content is for reference