DME6W1K-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors are increasingly being used as they provide higher levels of power integrity than traditional electrolytic or ceramic capacitors. This is because they have a much lower ESR (Equivalent Series Resistance) than traditional capacitors and are available in a range of dielectrics including polypropylene (PP), polystyrene (PS) and polyester (PE). Of all these dielectrics, the most popular is PP. The DME6W1K-F is a PP film capacitor, which is available in surface mount and through-hole versions, and is suitable for snubber, filtering and other applications.

The DME6W1K-F is designed for applications that require high power and a low ESR. It has an ESR of 0.1 Ohms; compared to other PP film capacitors with an ESR of 0.2 Ohms or higher. It also has a rated voltage of 630V, which is suitable for a range of applications. Its category temperature range is -55°C to 125°C, which makes it suitable for most applications.

The DME6W1K-F is a small, lightweight capacitor with a high capacitance of 1000 μF. This makes it useful for applications that require a large capacitance in a small package. It has a low equivalent series inductance (ESL) of 5.0nH, which makes it suitable for high frequency applications. Its mounting style is SMD, which makes it easy to install in circuit boards. It also has a wide range of capacitance values, from 0.1μF to 2000μF.

The working principle of a film capacitor is similar to that of an electrolytic capacitor. It consists of two metal electrodes placed in a dielectric medium. When a voltage is applied to the electrodes, a current flows in between them, resulting in the accumulation of electrical charge. This charge is referred to as capacitance and is measured in Farads. The capacitance will also depend on the size and type of the dielectric material used in the film capacitor.

The DME6W1K-F is suitable for a wide range of applications such as power supplies, filtering, snubber circuits and high frequency circuits. It can be used as part of a power supply circuit to reduce ripple and noise. It can also be used in snubber circuits to reduce voltage transients. In addition, it can be used in high frequency circuits to reduce RFI (Radio Frequency Interference) and to improve signal integrity.

The DME6W1K-F is a reliable, high quality PP film capacitor that is suitable for high power applications. It has a low ESR and a wide range of capacitance values, making it suitable for a range of applications. It is also easy to install, as it comes in a surface-mount package. Overall, the DME6W1K-F is a great choice for high power, low ESR and high frequency applications.

The specific data is subject to PDF, and the above content is for reference