DPF60C200HJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes – rectifiers – arrays are components used to convert the current from alternating current (AC) to direct current (DC). The DPF60C200HJ is a three-phase bridge rectifier with six diodes that contain two pairs of parallel connected diodes. It is a single-phase full-wave rectifier with a maximum output current of 200 Amps and a maximum reverse voltage of 600 V.

The DPF60C200HJ is used in a wide variety of applications including power rectification, power factor correction, and frequency converters. It can be used in battery charging, automotive charging, and AC/DC converters. Additionally, the DPF60C200HJ can serve as an overload protection device in industrial equipment, medical equipment, and in home appliances.

The DPF60C200HJ works on a principle whereby a single phase alternating current (AC) supply is passed though a bridge circuit consisting of six diodes arranged in two parallel pairs; each diode pair is used to pass current through the load in opposite directions. When the AC voltage goes above the forward voltage level of the diode, it will allow current to flow, thus rectifying the AC voltage and converting it to a direct current (DC) signal. Once the other half of the AC cycle is reached, the diodes switch directions, allowing the current to flow in the opposite direction and thus creating a full wave rectified signal with no gaps in the signal. As the signal is converted from AC to DC, the output voltage will be less than that of the input voltage due to the voltage drop caused by the diodes.

The DPF60C200HJ has a number of features that make it ideal for certain applications. It is compact and easy to install, and the reverse voltage isolation is 200Vdc which ensures it is compatible with most single-phase power sources. The anode has a high current rating, which allows it to safely handle high loads. Additionally, it has a high efficiency due to its low forward voltage drop and its low power consumption. The device also has a low heat generation, resulting in less heating of the surrounding environment.

In conclusion, the DPF60C200J rectifier is a single phase full-wave rectifier with two pairs of parallel connected diodes and a maximum output current of 200 Amps at a maximum reverse voltage of 600 VDC. It is used in a wide variety of applications including power rectification, power factor correction, frequency converters, battery charging and AC/DC converters for industrial equipment, medical equipment, and home appliances. It is ideal for these applications due to its compact size, high current rating, high efficiency, and low heat generation.

The specific data is subject to PDF, and the above content is for reference