DS1010S-250

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DS1010S-250 is one of the many products that fall within the category of clock/timing - delay lines. Delay lines are an essential piece of specialized electronic hardware and have a wide range of applications. As the name implies, a delay line is a special type of circuit that is designed to cause a delay between the input signal and the output signal. The DS1010S-250 in particular is a monolithic 50 Ohm list of programable delay lines. These types of delay lines are distinguished by their ability to be programmed and adjusted by the user, or alternatively, monitored and adjusted by the application software.

In order to understand how and why a delay line works, it is necessary to first understand the fundamental principles behind digital timings and semiconductor electronics in general. Digital timing involves the use of a clock to force the digital components to coordinate their activities and hence ensure perfect operation. The clock supplies the components with a signal that is used to synchronize all the activities of the digital systems. If the signal is correctly timed and the components respond properly it is possible to produce the desired signal at the output after a known amount of time has elapsed. This is possible because the signal is propagated through all the components of the system.

The DS1010S-250 delay line works on the same basic principle, except that the delay is programed or preset by the user. This allows users to control the amount of time that elapses between the input signal and the output signal. This makes them useful for many applications, including synchronization, phase shifting, fixed time delays and frequency shifting. The programing is done via the use of an address port, a data bus and a control port.

The address port is used to select the individual delay elements within a given line. The control port is used to initiate the data transfers as well as activate or de-activate the delay elements. The data bus carries the actual data signals and can be used for setting the delay elements as well as for reading out the status of the delay elements. The delay times are stored in the form of internal registers which are accessible via the data bus.

In addition to being programmable, the DS1010S-250 is also highly reliable and very low power. Its maximum power consumption is only 80 mW, meaning that it will not significantly impact your system\'s overall power budget. Furthermore, it is highly reliable as it is designed to operate over an extended temperature range and to withstand shocks, vibration and other environmental stresses. The DS1010S-250 is also highly configurable, allowing it to be tailored to fit an application\'s specific requirements.

The DS1010S-250 is an ideal programmable delay line for many clock/timing applications. It has a wide range of features, including long delays and short delays, programmable delay elements and adjustable delay times. It is also highly reliable and consumes very low power, making it suitable for both small-scale and large-scale systems. With this programmable delay line, users can easily control and monitor the timing of their digital systems and ensure that they always operate at their best.

The specific data is subject to PDF, and the above content is for reference