DS1834AS

Series:	EconoReset
Packaging:	Tube
Part Status:	Active
Type:	Multi-Voltage Supervisor
Number of Voltages Monitored:	2
Output:	Open Drain or Open Collector
Reset:	Active Low
Reset Timeout:	200 ms Minimum
Voltage - Threshold:	3.3V, 5V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC
Base Part Number:	DS1834

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The DS1834AS is an integrated circuit that is used for an array of purposes. It belongs to the family of PMIC (Power Management Intelligent Controller), specifically under the supervisors family. PMICTs have been developed to satisfy the need for efficient and powerful power management systems and the DS1834AS is no exception. In this article, we will discuss the application field and working principle of the DS1834AS, as it pertains to its use as part of PMIC - Supervisors.

Application Field

The DS1834AS is typically used in industrial and embedded control applications that require power management control. This can include applications such as HVAC systems, solar inverters, LED lighting control, or application-specific configurations. This integrated circuit can also be used in electrical grids or to provide instrumentation feedback. Additionally, this controller is ideal for many low voltage applications that require long battery life. The DS1834AS is an improved version of the DS1834 which provides the same functionality with a few extra features. This includes a logic output for external device control, and onboard alarm capability for low and high battery detection. This PMIC is capable of providing regulated power from 1.5V up to 12V with adjustable current capabilities as high as 15A.

Working Principle

The DS1834AS operates using a four-stage power sequence that is designed for high speed synchronization and efficient power regulation. This system consists of four self-sequencing regulators that operate in four stages. The first stage of the DS1834AS power sequence is a start-up phase. In this stage, the output of the integrated circuit is set to 0V and the power source is connected to the first converter via a mosfet switch. When the output of the first converter reaches a certain voltage, the start-up phase is completed and the second phase begins. The second phase is the boost phase which is the main purpose of this integrated circuit. In this phase, the second converter boosts the voltage up to the desired set point. During this phase, the load protection circuit is enabled to protect against accidental overloads.The third phase of the sequence is the feedback phase which involves the PWM (pulse width modulation) control. In this phase, the third converter optimizes the output current and voltage of the regulated output by monitoring the output voltage of the previous stage and adjusting it accordingly.The fourth and final phase is the silence phase which is the final power regulation stage. This stage is used to ensure that the output voltage and current remain steady at the desired parameters without creating any noise. During this phase, the PWM controller is adjusted to further refine the output of the integrated circuit and the output voltage is monitored between the setpoints for maximum efficiency.

Conclusion

The DS1834AS is a powerful and efficient PMIC - Supervisors designed to provide reliable and consistent power regulation. This integrated circuit can provide regulated output from 1.5V up to 12V and handle currents up to 15A, making it ideal for industrial and embedded control applications or any application requiring long battery life. It operates using a four-stage power sequence to ensure reliable and consistent output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description