DS24B33Q+U

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DS24B33Q+U is a highly integrated, low-power 4K bit non-volatile memory, which is commonly used in today\'s embedded systems. Its low power design and integrated features make it a good choice for memory applications in portable and low-power systems.

DS24B33Q+U offers two solutions: Serial EEPROM and SPI-to-I/O bridge. It is a non-volatile memory device with a two-wire serial interface that requires only one VDD supply voltage. This allows the device to be used in low-voltage systems, such as battery-powered systems.

DS24B33Q+U has an on-chip write protection circuit that prevents unwanted write operations. A programmable Address/Data counter and a hardware write protect enable/disable register are provided to enable the device to be used in applications where memory writes need to be protected against accidental writes.

The Serial EEPROM solution of the DS24B33Q+U offers 4,096 bits of non-volatile memory. The data is stored in 256 bytes and is divided into two banks. It supports a two-wire serial interface and provides a “chip enable” signal to enable programming or reading of the bytes. The device also features a “write-protect” signal to prevent accidental writes to the memory.

The SPI-to-I/O bridge solution of the DS24B33Q+U offers sixteen I/O ports that can be used to connect serial peripherals. It supports SPI interface and I/O port pin-definition for programming and readings. The I/O ports are configurable, allowing the user to choose the direction of the dataflow. The SPI interface is also two-wire, with control, clock and data pins.

The primary application field of the DS24B33Q+U are embedded systems, particularly those with a low power design. Its low power design and on-chip write protection features make it an ideal solution for low power and portable applications. The Serial EEPROM and the SPI-to-I/O bridge solutions make it suitable for a wide range of memory applications including digital signal processing, data acquisition, and control systems.

The working principle of the DS24B33Q+U is simple. The device is connected to a host system via the two-wire serial interface. The host can then use the commands from the serial protocol to either write or read data from the memory. The data can be written and read in 8-bit or 32-bit chunks, depending on the command used. The write-protect signal can be used to prevent accidental writes to the memory.

In summary, the DS24B33Q+U is a highly integrated, low-power 4K bit non-volatile memory device that is commonly used in embedded systems. Its two solutions, Serial EEPROM and SPI-to-I/O bridge, make it an ideal solution for low power and portable applications. The device offers an on-chip write protection circuit, a programmable Address/Data counter and a hardware write protection enable/disable register. Its working principle is simple and it can be used to write and read data in 8-bit or 32-bit chunks, depending on the command used. Thus, DS24B33Q+U is an ideal solution for memory applications in embedded systems.

The specific data is subject to PDF, and the above content is for reference