DS2500PE-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC Converters

The DS2500PE-3 is a particularly versatile ac/dc converter. It belongs to the family of power electronics converters, which are used to convert electricity conveniently in various applications. The DS2500PE-3 is designed to support industrial and commercial applications, and can be used to convert ac voltage into dc voltage, or dc voltage into ac voltage. The device can also convert DC voltage into lower voltage AC with a frequency of up to 400 Hz, depending on the application.

Specification of DS2500PE-3

The DS2500PE-3 has a wide range of specifications, such as an input voltage range of 120-600 VAC or 180-570 VDC, and support for a maximum output current of 200A. Its power factor is 0.9-1.0, whereas its efficiency is typically greater than 90%. The operating temperature range is from -40 to +60 degrees Celsius, and it also features short-circuit, overload, surge, and over-temperature protection.

Application Fields

The DS2500PE-3 is a highly versatile device, and its applications vary greatly depending on the purpose. Typical applications include battery charging, solar panel charging, and electric vehicle charging. Furthermore, the device can also be used in applications such as motor speed control, motor soft start, as well as motor-dynamic braking. The DS2500PE-3 can also be used in UPS systems, DC-DC converters, and power supplies.

Working Principle

The DS2500PE-3 converts AC voltage into DC voltage or DC voltage into AC voltage with the help of its power electronic circuitry. The circuit includes a number of components such as a power diode, thyristors, capacitors, and other smoothing components. In order to convert AC voltage into DC voltage, the device uses Power Diode rectification, which allows the device to convert AC voltage into a continuous DC voltage output. In order to convert DC voltage into AC voltage, the device uses Pulse Width Modulation (PWM). This works by comparing the DC waveform to a reference waveform and then adjusting the duty cycle of the PWM as it compares the two waveforms. This results in an AC voltage output.

Benefits

The DS2500PE-3 is a great choice for applications where high-efficiency, reliability, and long operating life are required. It offers a wide range of features, such as high efficiency, low output ripple, over-temperature protection, and surge protection. Furthermore, the device has a wide input voltage range, allowing it to operate with different input voltages. Its excellent power factor also ensures that the device will not cause any power loss and unnecessary havoc in the electrical system.

Maintenance and Operation

The DS2500PE-3 is easy to operate and maintain. The device requires very little maintenance, as it features over-temperature and overload protection. In addition, the device also has a low ripple output, which reduces the need for frequent maintenance. The device also has an operating temperature range of -40 to +60°C, which means it can be used in a variety of environments and applications.

Conclusion

The DS2500PE-3 is a versatile ac/dc power converter that can be used in a variety of industrial, commercial, and residential applications. It features a wide range of features that make it an ideal choice for applications that require high efficiency, reliability, and long operating life. It is easy to operate and maintain, and is a cost-effective option for all applications.

The specific data is subject to PDF, and the above content is for reference