DS8921MX/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Drivers, Receivers, and Transceivers are essential parts of many electronic systems. At the most basic level, drivers provide the power for a signal transmission to occur, receivers are used to detect the signal and transceivers are used for bi-directional communication between two points. The DS8921MX/NOPB is one such device that can be used in a variety of applications and their respective principles are discussed below.

The DS8921MX/NOPB is part of Texas Instrument’s family of voltage translators, and they are typically used to interface two circuits using different voltage levels. This is especially useful when attempting to bridge a signal between two logic systems with different logic thresholds. The DS8921MX/NOPB has two independent channels which allow it to simultaneously shift both direction signal voltages. It has an adjustable voltage range which can be set to either 1.65V-5.5V or 0V-5.5V.

When attempting to bridge two circuits with different logic requirements, a voltage translator is needed to ensure that the signal integrity is maintained. Voltage translators, such as the DS8921MX/NOPB, can provide an interface between two isolated systems, allowing them to communicate across the gap. It does this by converting the input signal from a logic high and low voltage, to a logic level on the output side, and vice versa.

In addition to voltage translators, there are other components which are related to the DS8921MX/NOPB. For example, the DS8921MX/NOPB is compatible with MOSFETs and Micro Controllers. The MOSFETs are used to ensure proper current conduction between the two circuits, while the Micro Controllers are used to appropriately direct the flow of the signals between the two systems. Together, these components are used to ensure that signals are properly translated between two circuits, regardless of the voltage levels applied to each.

The working principle of the DS8921MX/NOPB is based on the concept of charge transfer. This concept states that when a voltage is applied to a device, an electric field is created, and this electric field causes an electric charge to move from one end of the device to the other. This charge transfer will cause an electrical potential difference, which can then be used as a voltage or current source for the desired signal.

The DS8921MX/NOPB utilizes this principle to effectively bridge the gap between two different logic systems, by allowing the signal to travel through the voltage translator. When the voltage levels are applied to the input and output of the device, it takes the input level and translates it to the output level, while the reverse logic also applies. In this way, the signal transmission is achieved without introducing any errors, and without sacrificing signal integrity.

The DS8921MX/NOPB represents one of the most effective ways to bridge the gap between two isolated circuits, with different voltage and logic levels. It uses the concept of charge transfer to ensure reliable signal translations, and its adjustable voltage range means that it can be used in a variety of applications. Ultimately, it is a great option for any designer looking to bridge two circuits with different voltage and logic requirements.

The specific data is subject to PDF, and the above content is for reference