DSB1A60

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DSB1A60 is a Silicon rectifier (positive DSB1A60) which is widely used for rectification of AC power into DC power for applications such as power supplies, battery chargers and other power conversion circuits. This single diode rectifier has an anode that is connected to the positive end of the AC signal and a cathode that is connected to the negative end of the AC signal. It is also used in automobiles and other electronic applications such as electronic circuits, consumer electronics and computer applications.

The most important information on a DSB1A60 is its forward voltage drop or VF which is typically 0.57-0.7V. With a forward drop of 0.7V, it can pass a peak inverse voltage (PIV) of 600 volts AC. This peak voltage rating is critical for applications that require the rectification of AC power into DC power, as it determines the maximum forward voltage that can be present in the circuit without causing any permanent damage to the rectifier. Since the DSB1A60 has a reverse leakage current of 1.0 mA typically at 25 degrees Celsius, it is suitable for use in low power applications.

The DSB1A60 is available in both a single-phase and three-phase format. In a single-phase application, one diode is connected across the AC line, and in a three-phase application, three diodes are connected in a bridge configuration across the three AC line phases. The voltage drops of the DSB1A60 in both single phase and three-phase applications are the same, with a maximum of 0.7V.

The working principle of a DSB1A60 is relatively simple. When an AC signal is applied to the diode, it begins to conduct electricity and allow current to pass through it. This occurs because the voltage on the anode side of the diode is greater than the voltage on the cathode side, which causes current to flow through the diode. The diode continues to conduct until the waveform of the AC signal drops below the forward voltage drop of the diode. The higher the peak voltage of the waveform, the more current the diode can pass through it before reaching its limit.

In terms of applications, one of the most common uses for the DSB1A60 is in AC-DC power supplies. These power supplies use the DSB1A60 as a rectifier to convert the AC signal into DC signal for use in consumer electronics, computers, and other electronics applications. The DSB1A60 is also frequently used in automobile applications, including alternators and starters.

The DSB1A60 is a robust and reliable diode that is highly suitable for a wide range of electronic applications. Its low forward voltage drop and reverse leakage current make it ideal for applications that require high current and low power. As such, it is an ideal choice for a variety of rectification and power conversion applications.

The specific data is subject to PDF, and the above content is for reference