DSC1001DI2-008.0000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are vital components in a variety of electronic circuits. They are usually used for generating and sustaining sinusoidal waveforms, and are also sometimes employed as frequency and timekeeping devices. Among all of the oscillators, DSC1001DI2-008.0000T is one of the most conventional, and economical, oscillators available in the market. It is widely used in consumer and industrial applications, and has been studied extensively due to its relatively low cost and wide operating range.

DSC1001DI2-008.0000T is a type of Digital Sinusoidal Carrier (DSC) oscillator. It is designed to deliver a sinusoidal signal with a bandwidth of 8 kHz to 22 MHz. This allows the oscillator to generate harmonics, which can further be used as noise generators, radio receivers, oscillating circuits, signal separators, and more. Moreover, it can also be used for various communication and data transmission applications.

The working principle of this oscillator involves the principle of phasor multiplication. A phasor is a mathematical representation of a sinusoidal waveform with the amplitude and phase angle clearly shown. By multiplying two phasors with the same values of frequency but with different phase angles, a third phasor with a different amplitude will be generated. This third phasor forms the output signal of the DSC1001DI2-008.0000T oscillator.

DSC1001DI2-008.0000T is driven by an RC circuit which contains a resistor and a capacitor connected in series. When the oscillator is powered on, the capacitor begins to charge up. The voltage across the capacitor increases until it reaches a threshold value, at which point it begins to discharge. This results in a sinusoidal waveform which is used to drive the oscillator. The frequency of the oscillator is determined by the value of the resistance and the capacitance.

The oscillator has two modes of operation, namely, a ‘low’ and a ‘high’ frequency mode. In the low frequency mode, the oscillator operates at frequencies of below 40 kHz, and is mainly used for low frequency applications such as communication systems, music synthesizers, digital logic gates, and analog circuits. In the high frequency mode, it operates at frequencies of up to 200 MHz, and is used for high speed and high frequency applications such as radio transmission, ultrasound imaging, power amplifiers, and switching circuits.

The output frequency of this oscillator can also be adjusted by using the basic equations governing the voltage and current in a capacitor. This can be done by connecting the oscillator to a variable voltage supply, which can modify the power supply voltage to the oscillator and hence its output frequency.

The DSC1001DI2-008.0000T oscillator consists of a compact package with integrated components. This makes it highly reliable and cost-effective, making it ideal for industrial applications. Furthermore, the oscillator also has a wide tuning range, which allows it to cover a wide range of frequencies – from DC signals to frequencies of over 200MHz.

Overall, DSC1001DI2-008.0000T is an extremely capable oscillator. It is widely used in both consumer and industrial applications and is a cost-effective and reliable option for those looking to generate and sustain sinusoidal waveforms and a wide range of frequencies.

The specific data is subject to PDF, and the above content is for reference