DSC1123AI2-125.0000T

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	22mA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead Exposed Pad
Mounting Type:	Surface Mount
Ratings:	AEC-Q100
Current - Supply (Max):	32mA
Operating Temperature:	-40°C ~ 85°C
Series:	DSC1123
Voltage - Supply:	2.25 V ~ 3.6 V
Output:	LVDS
Function:	Enable/Disable
Frequency:	125MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

DSC1123AI2-125.0000T is an oscillator, used in a range of applications in consumer and industrial electronics. This oscillator is distributed by Yaesu, a manufacturer of electronic components and systems, and is designed for low-voltage, low-power applications. The oscillator operates in a frequency range of 2.5MHz to 125.0000T Hz.

Application fields

DSC1123AI2-125.0000T oscillators are used in a variety of applications, including radio transmitters, radio receivers, cell phones, Bluetooth, Wi-Fi systems, and aerospace navigation systems. They are also used in navigation and guidance systems, as well as in television and audio systems, to generate accurate and stable signals.

Working Principle

The DSC1123AI2-125.0000T oscillator works on the same principle as other oscillators. It converts electrical energy into oscillatory energy, which can be used to produce a desired frequency. This oscillator is made up of two sections: a quartz crystal and a transceiver. The quartz crystal component consists of a quartz plate which vibrates in response to an electrical current. The vibrations of the quartz plate cause changes in the voltage across the transceiver, which is connected to the quartz plate. The output of the oscillator is dependent on the voltage across the transceiver, as well as on the type of quartz crystal used.As the voltage across the transceiver changes, the frequency of the signal produced by the oscillator can be adjusted. The frequency of the signal can be tuned by introducing an inductance, or by connecting additional capacitors or resistors in the circuit. The oscillator can be used to produce several signals, including sine, square, and sawtooth waveforms. The output of the oscillator is also very stable, as the output frequency is not affected by changes in temperature.

Conclusion

In conclusion, the DSC1123AI2-125.0000T oscillator is a reliable and versatile oscillator for many applications. It is used in consumer and industrial applications, and works on the same principle as other oscillators. The frequency of the oscillator can be tuned by adjusting the inductance or by adding additional capacitors or resistors in the circuit, and the output frequency is very stable.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description