DSC2033FI1-F0026T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators are specialized oscillators that make use of an external pin for configuration and selection. The DSC2033FI1-F0026T oscillator is an example of this type of oscillator, and it is widely used in a variety of industries. In this article, we\'ll take a look at the application field and working principle of the DSC2033FI1-F0026T oscillator.

DSC2033FI1-F0026T oscillators are often used in applications that require very high frequency accuracy, such as clock generation circuits, timing circuits and communications systems. They are also useful for frequency control applications in motor control and power supply circuits. The oscillator features two configuration pins that allow the user to select the frequency of the oscillator and set the output modes (waveforms).

The DSC2033FI1-F0026T oscillator has a core voltage range from 0.8V to 3.3V. It is designed to accommodate an external crystal or an external resistor, depending on the needs of the application. When an external crystal is used, the frequency accuracy can be as high as 0.1ppm. The device supports both the P and W cycle modes, as well as the dual-edge mode. The operating temperature range is -30°C to +85 °C.

The DSC2033FI1-F0026T oscillator has an embedded Phase-Locked Loop (PLL) circuit and an on-chip voltage regulator. The PLL circuit is used to generate clock signals that are synchronized to the external crystal oscillator, while the voltage regulator is used to supply the oscillator with the necessary power and stabilize its frequency.

The working principle of the DSC2033FI1-F0026T oscillator is based on the oscillator configuration pins. When an external crystal or resistor is connected to the pins, the oscillator enters the calibration mode. This calibration mode is used to measure and compare the frequency of the external source with the designed frequency of the DSC2033FI1-F0026T oscillator.

The core voltage level and the external resistor/crystal frequency are used to calculate and determine the oscillator frequency. The output mode (waveform) is then selected based on the digital code written to the configuration pins. Once the code is written, the oscillator will output the corresponding signal. The amplitude of the signal can be adjusted using the integrated voltage regulator.

In summary, the DSC2033FI1-F0026T oscillator is a Pin Configured/Selectable Oscillator that is used in a variety of applications, such as clock generation, timer controls, communications systems and frequency control circuits. It has a wide range of operating temperature and voltage levels, and can be calibrated precisely to match the external frequency source. With its PLL circuit and on-chip voltage regulator, it can be used to generate highly accurate and stable oscillations.

The specific data is subject to PDF, and the above content is for reference