DSEC60-04A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DSEC60-04A is a rectifier array designed to provide short circuit current protection and reverse polarity protection for a wide range of applications. It is a combination of discrete rectifier diodes and MOSFETs, which provides high-current capability while maintaining low on-resistance and minimal component count. The DSEC60-04A is designed to be mounted on a circuit board, and can be used in either a standalone circuit or as part of a larger system. The DSEC60-04A has a peak power rating of 1.6 amps, a maximum forward voltage drop of 4V, and a maximum reverse voltage of 2V.

The DSEC60-04A is a two-phase rectifier array consisting of two MOSFETs and four diodes. The MOSFETs serve as the main switching element, while the diodes are used for reverse voltage protection and current limiting. During normal operation, the MOSFETs act as a switch that allows current to flow from a power source to the load. The diodes provide protection from reverse voltages, as well as limiting the maximum current that can flow through the device. The two main terminals of the device are designated as the positive and negative terminals, and each of these terminals also contains a diode. When a reverse voltage is applied to the positive terminal, the diode connected to the negative terminal will become forward biased and will draw current away from the load, thereby limiting the maximum current that can flow through the device.

The working principle of the DSEC60-04A depends on the appropriate drive signals applied to the MOSFET gates. When a positive gate voltage is applied, the MOSFETs will turn on, thus allowing current to flow from the power source to the load. When a negative gate voltage is applied, the MOSFETs will turn off, thus preventing current from flowing from the power source to the load. The diodes in the device serve as protection from reverse voltages, as well as limiting the maximum current that can flow through the device. When a reverse voltage is applied, the diode connected to the negative terminal will become forward biased and will draw current away from the load, thereby limiting the maximum current that can flow through the device.

The DSEC60-04A is primarily used in the protection of high-current systems, such as power supplies and motor controllers. It can also be used in a variety of other applications, such as electronic modules and lighting systems. The device provides a low-cost solution for protecting sensitive electronics from short circuit currents and reverse polarity voltages.

The DSEC60-04A is a versatile device that can be used in a variety of applications, such as power supplies, motor controllers, electronic modules, and lighting systems. It provides short circuit protection and reverse polarity protection and is designed to be mounted on a circuit board. The DSEC60-04A is a low-cost solution for providing high-current protection for sensitive electronics, and it is easy to install and use. It is an ideal rectifier array for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference