DSI17-08A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DSI17-08A is a single, rectifier, diode. It has a variety of applications across different industries and its working principle greatly varies on which application it is used. Before delving any deeper, however, it is important to understand the general characteristics and properties of this particular diode.

The DSI17-08A has a forward operating voltage of 20V, with a maximum peak reverse voltage of 50V. Its current ratings are as follows: Average Rectified Current (IF) of 8A and Peak Reverse Current of 17A. Its peak surge current, meanwhile, measures at a maximum of 200A. Its Junction Temperature is 125 °C with a maximum storage temperature of 150 °C.

Now that the diode’s general properties have been outlined, the various applications of the DSI17-08A can be addressed. Because of its relatively high forward voltage, the diode is primarily used to regulate power in applications where output voltages require elevated levels of current. Popular applications include DC-DC and AC-DC converters, as well as motor control circuits and DC pumps. Additionally, the diode can be used for rectifying AC-DC signals in solar energy systems and for battery charging in low-voltage applications.

The DSI17-08A’s working principle greatly varies depending on the application. In the simplest terms, a diode’s main function is to control the transfer of current between two electrical components. In a DC-DC converter, for example, the DSI17-08A can be wired in a configuration that closes the circuit when there is a positive voltage applied to the anode, allowing current to flow from the cathode to the anode. When the opposite occurs and there is a negative voltage applied, the diode prevents current from flowing.

In the case of AC-DC rectification, the DSI17-08A operates similarly. As the alternating current is applied to the diode, it will open to allow current to pass through on one half of the cycle, and then switch to the opposite pole on the other half, blocking off the current and completing the cycle. This continuous switching makes it possible to efficiently convert alternating current into direct current.

The DSI17-08A can also be used in motor control circuits. In this case, the diode is used to safeguard a motor from overload by preventing current from flowing when the motor shuts off. By connecting the DSI17-08A in a configuration that prevents back-current from flowing, the motor control circuit is protected from overloading.

Finally, the diode can be used in DC pumps to regulate the flow of current between two components. When the circuit is powered on, the diode closes and allows current to flow, thus creating a flow of energy. When the current is turned off, however, the diode opens and prevents any back-current from flowing, thus regulating the flow of energy.

The DSI17-08A is a single rectifier diode with a diverse range of applications and a variable working principle, dependent on the application. From DC-DC and AC-DC converters to motor control circuits and DC pumps, the diode is capable of effectively regulating power, converting AC-DC and even protecting against overloads.

The specific data is subject to PDF, and the above content is for reference