DSPIC33EP128GM310-E/PT

Program Memory Type:	FLASH
Base Part Number:	DSPIC33EP128GM310
Supplier Device Package:	100-TQFP (12x12)
Package / Case:	100-TQFP
Operating Temperature:	-40°C ~ 125°C (TA)
Oscillator Type:	Internal
Data Converters:	A/D 49x10b/12b
Voltage - Supply (Vcc/Vdd):	3 V ~ 3.6 V
RAM Size:	16K x 8
EEPROM Size:	--
Series:	dsPIC™ 33EP
Program Memory Size:	128KB (43K x 24)
Number of I/O:	85
Peripherals:	Brown-out Detect/Reset, DMA, I²S, Motor Control PWM, POR, PWM, WDT
Connectivity:	I²C, IrDA, LINbus, QEI, SPI, UART/USART
Speed:	60 MIPs
Core Size:	16-Bit
Core Processor:	dsPIC
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of DSPIC33EP128GM310-E/PT

The DSPIC33EP128GM310-E/PT is a high-performance, 16-bit dsPIC33E digital signal controller (DSC) from Microchip Technology. This dsPIC33E DSC family is based on the eXtreme Low Power (XLP) 16-bit dsPIC33E architecture. Leveraging the XLP operating from 1.8V to 3.6V, both the DSPic and 40 MIPS are obtainable, with 16-bit precision. Additionally, it boasts new several ways for achieving power savings, an FFT accelerator with four dedicated circuits, and a 4MB Flash memory to safeguard valuable code, data, and configuration information.

Features of DSPIC33EP128GM310-E/PT

The dsPIC33EP128GM310-E/PT comes with several notable features, including:

• Flexible power management modes to minimize power consumption
• Four dedicated circuits for FFT operations, signed multiplication and square root operations, and parallel data processing
• Excellent computations performance due to the XLP 16-bit core and FPU
• Enhanced peripherals, such as four 16-bit timers, SPI, I²C, UART and other communication interfaces
• Up to 4MB Flash program memory

Application Field of DSPIC33EP128GM310-E/PT

The DSPIC33EP128GM310-E/PT digital signal controller (DSC) is mainly used in the motor and motor control industry, where a wide range of motion control applications are necessary. It can be used for various implementations, such as small AC and brushless DC motors for home appliances, and more complex industrial control motors. This DSC is also used in automotive and automotive control stations. Due to its wide range of power management modes, DSPIC33EP128GM310-E/PT DSC offers excellent computing power and consumes very low power when idle. Additionally, it is formidable for any data acquisition system since its I/O Programmable Terminals provide a huge variety of analog timer input/outputs. Apart from these, the digital signal controller is also used in wind turbines and other industrial equipment as well.

Working Principle of DSPIC33EP128GM310-E/PT

The DSPIC33EP128GM310-E/PT digital signal controller operates on the eXtreme Low Power (XLP) 16-bit dsPIC33E architecture. The digital signal controller features an internal power management module that can switch between multiple power profiles dependent on the application\'s needs. The module is capable of choosing the optimal power mode and can support low-power sleep modes. It also offers dynamic application-controlled power optimization where an application can sleep in low-power mode and then wake up when an event is detected by its peripherals. The DSPIC33EP128GM310-E/PT DSC is designed with four dedicated circuits for various computations such as FFT operations, signed multiplication, and square root operations. The controller also supports two general-purpose 16-bit timers, four 16-bit PWM channels, eight DMA channels, two UARTs, three SPI modules, and one I²C module for communication. Additionally, it is able to support various input/output configurations including analog timer input channels, I/O pins, leads, USB or CAN interfaces, and other communication protocols. The DSPIC33EP128GM310-E/PT controller development toolchain is powered by MPLAB X IDE, an open-source development of Microchip Technology. MPLAB X IDE includes an editor, compiler, development board and code debugger, and a comprehensive peripheral library as well to ease development. The toolchain also includes an analytics tool known as the MPLAB Harmony Configurator to create custom software or firmware applications directly from the library of components and tools.

Conclusion

The DSPIC33EP128GM310-E/PT digital signal controller is designed for various motion control and energy efficiency applications, providing developers with low-power operation and improved performance. With MPLAB X IDE and the MPLAB Harmony Configurator, developers can quickly develop and debug their applications. The DSPIC33EP128GM310-E/PT is a powerful and reliable solution for various motion control applications in a variety of industries.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description