DST2045C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DST2045C diode array is a type of rectifier used in power applications such as power supplies, motor drives, and solar and wind power converters. The device is designed to reduce power dissipation losses when operating in both forward and reverse bias conditions. The DST2045C is a 4 channel device that includes a series connection for sensing input, an isolation diode to allow the device to be switched on and off in both polarities, and an internal p-channel MOSFET for intelligent shutdown.

The external connection diagram of the DST2045C can be seen in Figure 1. As can be seen, the DST2045C includes four input channels, each with their own sense input for sensing a voltage or current. There are also two control inputs for enabling the device, one for the main power switch and one for the internal over-current detection circuitry. The output of the DST2045C is an open-drain output that can be connected to ground or to an external device.

The working principle of the DST2045C is as follows. When the control signals are low, the device is in off-state and the power supply is disconnected from the load. When the control signals are high, the main power switch is enabled and a voltage is applied to the input of the output stage. The output stage acts as a current limitation, limiting the current to the desired value. When the voltage at the input of the output stage exceeds the target current, the internal over-current protection circuitry is triggered, shutting down the power, leaving the load and output stage protected from any excessive current.

The DST2045C has a wide range of applications in power electronics such as AC/DC power supplies, motor drives, and solar and wind power converters. It can be used in applications where power dissipation needs to be reduced, as the device is able to operate in both reverse and forward bias conditions. It can also be used in applications where intelligent shut-down needs to be implemented, as it has an internal p-channel MOSFET for sensing input, an isolation diode for enabling the device in both polarities, and an internal over-current protection circuitry for protecting the load and output stage.

In conclusion, the DST2045C diode array is a type of rectifier used in power applications such as power supplies, motor drives, and solar and wind power converters. It is designed to reduce power dissipation losses when operating in both forward and reverse biasing conditions. Furthermore, it can be used to implement intelligent shut-down, as it includes a sense input, an isolation diode, and an internal over-current protection circuitry.

The specific data is subject to PDF, and the above content is for reference