DZ23C12-G3-18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Arrays

The DZ23C12-G3-18 is an array of Zener diodes, which are one type of diode specifically designed for regulating voltage. The DZ23C12-G3-18 is an array of 18 Zener diodes, and is principally used for precision voltage regulation, coupling, and voltage protection.

Application Field

Zener diodes are used in a wide range of applications, from consumer electronics to precision instrumentation. The DZ23C12-G3-18 is a highly precise array of 18 Zener diodes, and can provide precise voltage regulation and protection. In consumer electronics, the DZ23C12-G3-18 can be used as a voltage regulator, as well as a protection device in the event of over-voltage or spike conditions.

The DZ23C12-G3-18 is also designed for industrial applications. In industrial systems, the DZ23C12-G3-18 can be used as a precision voltage regulator to maintain a calibration or setting in a system. The DZ23C12-G3-18 can also be used to protect systems from over-voltage conditions, and to provide a reliable signal in applications that require precision signal coupling.

Working Principle

The DZ23C12-G3-18 is made up of 18 Zener diodes, which work by using a reverse-biased diode to limit voltage. A reverse-biased diode is connected in series with a resistor, so that when the voltage across the diode exceeds the Zener voltage, the diode begins to conduct current. This current flow causes the diode to act as a voltage regulator, preventing the voltage from rising again in response to further increases in the input voltage.

The Zener voltage of the DZ23C12-G3-18 is the same for all of the 18 diodes, and is specified as 12 V. This means that when the input voltage exceeds 12 V, the voltage across the diode will begin to rise, causing it to begin to conduct current. This current will flow through the resistor and the Zener diode, limiting the voltage to 12 V.

The DZ23C12-G3-18 is also equipped with a thermal protection device. This device monitors the temperature of the diodes, and if it detects that the temperature is too high, it will shut off the current flow. This prevents the diodes from burning out due to excessive current.

The DZ23C12-G3-18 is also designed for noise suppression, filtering out any transient input voltages of over 6 V. This protects the equipment from any spikes or sudden increases in the input voltage.

Conclusion

The DZ23C12-G3-18 is an array of 18 Zener diodes designed for precision voltage regulation and protection. It is designed for applications ranging from consumer electronics to industrial systems, with a Zener voltage of 12 V and a thermal protection device for additional safety. The DZ23C12-G3-18 also comes with a noise suppressor for transient voltages of over 6 V, protecting the system from spikes.

The specific data is subject to PDF, and the above content is for reference