DZ23C3V0-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are devices that are used to allow current to flow in one direction only. Zener diodes are a type of diode which are used for their ability to “break down” when the voltage across the diode exceeds a certain threshold, allowing current to flow in both directions. Zener array diodes are similar to Zener diodes except they contain a number of individual Zener diodes connected in series, allowing higher breakdown voltages.

The DZ23C3V0-7 is a type of Zener array diode that consists of six Zener diode chips on a ceramic substrate. Each diode chip is designed to have a breakdown voltage of 3.3 volts, giving it a total breakdown voltage of 19.8 volts. The diode chip is designed to handle forward currents of up to 100 mA, making it suitable for a wide variety of applications.

The DZ23C3V0-7 can be used in a variety of applications where a breakdown voltage of 19.8 volts is needed. It is commonly used in voltage regulation circuits, as it can be used to convert a higher input voltage to a regulated lower output voltage. The DZ23C3V0-7 is also used in overvoltage protection circuits, as the diode array will break down when the input voltage exceeds 19.8 volts, preventing any further damage to the circuit.

In terms of its working principle, the DZ23C3V0-7 operates like any other Zener diode array. It operates in a forward biased mode when an input voltage which is less than 19.8 volts is applied to it. In this state, a small amount of current will flow through the device, allowing it to act as a current limiter. When the input voltage exceeds 19.8 volts, the Zener diodes in the array undergo “Zener breakdown” allowing current to flow in both directions. This is the point where the voltage is regulated to a lower output.

The array can be set up to provide a variety of different output voltages, depending on the number of Zener diode chips in the array and the breakdown voltage of each diode chip. The DZ23C3V0-7 has six Zener diodes in the array, each with a breakdown voltage of 3.3 volts, giving it a total breakdown voltage of 19.8 volts.

The DZ23C3V0-7 is a useful component for a variety of applications, such as voltage regulation, overvoltage protection, and current limiting. It can also be used in a variety of different circuit configurations, allowing it to be used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference