E2E2-X10MY1-M4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Proximity sensors are types of detector that detect the presence of objects without physical contact. One of the most common proximity sensors are available in two types which are inductive and capacitive sensors. Among these, the most widely used is an E2E2-X10MY1-M4 inductive proximity sensor. This sensor has been designed to detect ferromagnetic objects such as steel and iron and consists of an electromagnetic coil, an inductive amplifier and a switch. The sensor works by sending an electromagnetic signal to a target object. If the object is ferromagnetic, the electromagnetic field generated by the coil will be altered by the presence of the object, thus triggering the switch.

The E2E2-X10MY1-M4 has many applications in varied industries such as industrial automation, automotive, and medical. In industrial automation, the E2E2-X10MY1-M4 can be used for a variety of applications such as detecting and monitoring objects, such as checking the presence of a part on a conveyor belt or monitoring a production line. In the automotive sector, this proximity sensor can be used for vehicle detection and the detection of misaligned parts. In medical applications, the E2E2-X10MY1-M4 can be used to detect the presence of objects such as body parts or medical instruments.

The working principle of the E2E2-X10MY1-M4 is quite straightforward. The sensor consists of an electromagnetic coil and an inductive amplifier, both of which are connected to a switch. When the sensor is powered, the coil will emit an electromagnetic signal. If a ferromagnetic object is present near the E2E2-X10MY1-M4, the electromagnetic field generated by the coil will be altered by the presence of the object, thus triggering the switch. Once the switch is triggered, the inductive amplifier will amplify the signal, which will then be sent to an electronic circuit board. This electronic circuit board is then responsible for the control logic to decide if the presence of an object has been detected or not.

In order to ensure precision and accuracy, the E2E2-X10MY1-M4 must be correctly calibrated. The calibration process involves adjusting the gain of the sensor to enable it to detect the presence of objects at the correct level. The induction power of the sensor can also be adjusted to allow the sensor to detect objects of different sizes and shapes. It is important to note that the E2E2-X10MY1-M4 is not designed to detect conductive objects such as copper or aluminum.

The E2E2-X10MY1-M4 inductive proximity sensor is a reliable and efficient sensor that is used in a variety of applications in many industries. Thanks to its simple design and easy calibration, it is a cost-effective solution for many applications that require precision detection of ferromagnetic objects.

The specific data is subject to PDF, and the above content is for reference