E6A2-CS3C 60P/R 0.5M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders are typically used in industrial automation systems to help control the speed and position of various motorized objects and components. In particular, the E6A2-CS3C 60P/R 0.5M has several key applications and working principles.

This encoder is ideal for applications that require feedback on the rotation and speed of a motor and precise positional information, such as robotics and automated assembly systems. It also performs functions such as speed control, positioning, and latching, and is well suited to machinery with high speed and low torque requirements. Its main function is to convert mechanical rotary movements to electrical pulses, providing digital information about the angular position, speed, and direction of shaft rotation.

The E6A2-CS3C 60P/R 0.5M features a resolution of 60 pulses per revolution (P/R) and a maximum speed of 0.5 million (M) revolutions per minute (RPM). This makes it suitable for applications where a high degree of repeatability is required, such as automated tape and wire-winding machines, as well as for applications with higher speeds, such as monitoring wind turbine RPMs.

The encoder is made up of two parts: a mechanical unit that is attached to the rotating shaft, and an electric circuit board that is wired to the motor. The mechanical unit includes a glass-disk rotor with code wheel teeth cut into it and an accelerometer. The teeth count corresponds with the number of code contacts on the electric circuit board. The accelerometer is used to measure the acceleration of the shaft, allowing the electrical circuit board to determine the speed and direction of rotation. The electric circuit board processes the data it receives from the mechanical unit and generates a train of digital pulses in response to every rotation of the shaft.

The output signal from the E6A2-CS3C 60P/R 0.5M is typically a quadrature signal, where two digital pulses (A and B) are output simultaneously from the electric circuit board to its connected device. The two pulses are 90º out of phase with each other, allowing the connected device to identify both the direction and the speed of the shaft. This allows the connected device to perform functions such as speed control, positioning, and latching.

The E6A2-CS3C 60P/R 0.5M is an accurate and reliable encoder that proves a useful addition to any industrial automation project. Its ability to measure shaft rotation speed and direction quickly and accurately make it a suitable choice for a wide range of applications including robotics, automated assembly systems, wire and cable winding machines, and wind turbine RPM monitoring.

The specific data is subject to PDF, and the above content is for reference