E6A2-CS5C 60P/R 2M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An encoder is an electrical device used to convert electrical signals into digital codes by changing the input current or voltage. The E6A2-CS5C 60P/R 2M is one type of encoder that can be used in various applications, such as in the fields of robotics, motion control, and automation.

The E6A2-CS5C has a maximum operating speed of 4,000rpm with a pulse count of 60 per revolution, giving an output of 2,000 pulses for one revolution. This encoder is a type-A, which means that it does not have an integral bearing. The encoder can be connected using either the mating H connector or a wiring harness. It is constructed in a small package with a shaft diameter of 6mm, and features a rated current of 20mA and a voltage of 5VDC.

The working principle of this encoder is based on the generation of a rectangular signal from a rotating shaft. A set of discs and slots are cut into the encoder shaft and arranged in a known sequence. As the shaft rotates, the slots pass over the sensing area of the encoder and a corresponding square wave is generated. This square wave is then used to accurately count the position of the shaft.

The E6A2-CS5C can be used in various applications. In robotics, it can be used for positional control and speed detection. In motion control, it can be used to accurately measure the position and speed of a moving object. In automation, it can be used for motion control systems and to accurately measure the production speed of automated systems. It can also be used to measure angular displacement and for angle position control.

The E6A2-CS5C encoder is a versatile device that can be used in a variety of applications. Its small size and simple wiring make it easy to install and configure. Its reliable operation and durability make it an ideal choice for motion control and automation applications.

The specific data is subject to PDF, and the above content is for reference