E6C3-CWZ5GH 2000P/R 1M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders play an important role in motion control. They are typically used to measure distances or provide feedback on motor position and speed. E6C3-CWZ5GH 2000P/R 1M is a widely used encoder produced by OMRON. This encoder is widely used in many applications such as robotics, automated guiding systems, and machine tools.

E6C3-CWZ5GH 2000P/R 1M encoder is a through-shaft type rotary encoder. The exterior of this encoder is composed of two components, a main body and a separate hollow shaft. The two components are tightly connected and sealed by a rubber gasket. The encoder has a hollow shaft with 8 mm diameter for signal transmission. On the other side, the encoder has a main body which houses all the necessary components such as optical sensors, encoder wheel, and gaskets.

Internal components of the E6C3-CWZ5GH 2000P/R 1M encoder include an optical sensor, and encoder wheel, a disk, and a gasket. The encoder wheel is mounted on a disk with a radius of 5 mm. The disk has a slit, which makes it possible to read the number of slots within the wheel. The encoder wheel is connected to the hollow shaft, and the optical sensor is mounted on the main body. The sensor is responsible for reading the number of slots as the encoder wheel spins.

The working principle of the E6C3-CWZ5GH 2000P/R 1M encoder is very simple. The encoder wheel is connected to the hollow shaft and rotates along with the shaft. As the wheel turns, the optical sensor mounted on the main body reads the number of slots in the wheel, which is then transmitted to an external device via a signal line. This external device can either be a motor or a system controller, depending on the application.

The E6C3-CWZ5GH 2000P/R 1M encoder is widely used in many applications such as robotics, automated guiding systems, and machine tools. In robotics, this encoder is used to measure distances and provide feedback on motor position and speed. In automated guiding systems, this encoder is used to track the position of a robot or a machine tool. For machine tools, this encoder is used to accurately measure and control the movements of the machine tool.

In conclusion, the E6C3-CWZ5GH 2000P/R 1M encoder is a widely used rotary encoder produced by OMRON. It is composed of two components, a main body and a separate hollow shaft. It has a working principle which is relatively simple and is widely used in many motion control applications. This encoder is an indispensable component for robotics, automated guiding systems, and machine tools.

The specific data is subject to PDF, and the above content is for reference