EC95F502W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

NTC thermistors are widely used as temperature sensors due to their broad temperature range and their ability to quickly respond to small changes in temperature. EC95F502W is a type of NTC thermistor that is commonly used in temperature sensitive applications. This article will discuss the application field and working principle of the EC95F502W.

The EC95F502W is suitable for a wide range of applications, including consumer electronics, automotive applications, medical instrumentation, air conditioning, industrial, and home appliance temperature monitoring. It is also widely used as a temperature control component, to measure and regulate the temperature of a system or environment. The EC95F502W can adjust its resistance in relation to the temperature, setting off the necessary response from a connected device. This makes it an ideal choice for integration of temperature monitoring in various equipment.

The EC95F502W thermistor is based on the principle of negative temperature coefficient (NTC). This means the resistance of the thermistor decreases when the temperature increases and vice versa. This behavior occurs due to the increase in atomic motion within the material, which increases the number of free electrons leading to a lower resistance across the device. NTC thermistors can be divided into two categories based on their reactivity; slow reacting thermistors and fast reacting thermistors. The EC95F502W falls into the latter category and can respond to even slight changes in temperature.

The detection range of the EC95F502W thermistor is -20° to 120° Celsius. This range is suitable for most common applications, but the range can be adjusted as per requirements. The typical resistance at 25° Celsius is approximately 2K Ohm, and the resistance sensitivity is 7-10% when the temperature increases by 1° Celsius. This means that the thermistor is capable of providing reliable performance even in the presence of slight fluctuations in the temperature range. The EC95F502W must be used in conjunction with other components, such as integrated circuit (IC) chips, to function properly.

To operate the EC95F502W thermistor, a power source is required. This power source should be designed such that it is compatible with the thermistor and provides consistent power output. Based on the intended application, the power source should also provide sufficient voltage, as the thermistor may require a higher voltage than normal. Most commercial thermistors require a voltage range of up to 5 Volts.

Once the power source is connected to the EC95F502W, the thermistor will measure changes in temperature and output corresponding resistance values. This data can then be used to control a system. For instance, the thermistor can be used as a thermostat to regulate the temperature of a given environment. The thermistor can also be used to control the power output of other components, as it can adjust its resistance according to the temperature.

In conclusion, the EC95F502W is a widely used NTC thermistor that is suitable for a wide range of temperature sensitive applications. It is capable of providing reliable performance within its detection range and its resistance can be adjusted based on the temperature. It must be used in conjunction with other components in order to function properly and requires a compatible power source to operate. This thermistor is suitable for both commercial and industrial applications that require reliable temperature measurements.

The specific data is subject to PDF, and the above content is for reference