ECL10US05-E

Power (Watts):	10W
Weight:	0.132 lb (59.87g)
Approvals:	CSA, cUL, EN, IEC, UL
Load Regulation:	±1%
Line Regulation:	±0.5%
Size / Dimension:	2.06" L x 1.07" W x 0.91" H (52.3mm x 27.2mm x 23.0mm)
Package / Case:	4-DIP Module
Mounting Type:	Through Hole
Efficiency:	75%
Operating Temperature:	-20°C ~ 70°C (With Derating)
Features:	OVP, SCP
Applications:	ITE (Commercial)
Series:	ECL
Current - Output (Max):	2A
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input:	85 ~ 264 VAC
Number of Outputs:	1
Moisture Sensitivity Level (MSL):	--
Type:	Enclosed
Lead Free Status / RoHS Status:	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC/DC converters, such as the ECL10US05-E model, are devices used to convert alternating current (AC) to direct current (DC). The conversion technology used in the ECL10US05-E is one of the most common and widely used in electronics applications.The ECL10US05-E model is a basic AC/DC converter, and the operating principle behind it is based on a transformer. It consists of two primary components: an AC voltage source and a transformer. The AC voltage source supplies the input voltage that will be converted to DC. The transformer is responsible for transforming the AC voltage into a DC form.The basic operating principle of the ECL10US05-E is as follows. The AC voltage is applied to the transformer’s primary winding. This creates an alternating magnetic field in the transformer core. This magnetic field induces an alternating current in the primary winding, and simultaneously the secondary winding of the transformer. The alternating current that is induced in the secondary winding is transferred to a rectifier circuit. The rectifier circuit then converts the alternating current into a stream of direct current. The rectifier circuit used in the ECL10US05-E model is a full wave bridge rectifier. A full-wave bridge rectifier consists of four diodes that are linked in a bridge circuit configuration. The diodes allow the current to flow in only one direction. The output of the bridge rectifier is a direct current with a pulsating waveform. The average voltage of the waveform is then filtered out by a capacitor and diode network that is connected across the output. This filter capacitor and diode network also eliminates the ripple in the direct current output waveform.The ECL10US05-E model is used in a wide variety of applications. It is used to power devices that require a stable direct current supply, such as medical equipment, security systems, and consumer electronics. The power ratings of the ECL10US05-E range from 3 Watts up to 20 Watts. The device has an input voltage rating of 100V to 240V AC, with a frequency rating of 47Hz to 63Hz. The rated output voltage of the ECL10US05-E is 12V DC, with an output current range of up to one ampere.The ECL10US05-E model is designed to be energy efficient and has a typical efficiency rating of 80%. It is also designed to operate in a wide range of temperatures, from -25°C to + 70°C. It has a wide input and output voltage operating range, and can be used with different types of AC input sources. The device has a wide range of safety certifications, including UL, CB, and CE. The ECL10US05-E model is a versatile AC/DC converter that can be used in a variety of applications. It is a cost effective and reliable way to convert AC to DC, and is a valuable component in the electronics industry.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description