EFR32BG1B132F256IM32-C0

Series:	Blue Gecko
Part Status:	Active
Type:	TxRx + MCU
RF Family/Standard:	Bluetooth
Protocol:	Bluetooth v4.0
Frequency:	2.4GHz
Data Rate (Max):	2Mbps
Power - Output:	3dBm
Memory Size:	256kB Flash, 32kB RAM
Serial Interfaces:	I²C, I²S, SPI, UART
GPIO:	16
Voltage - Supply:	1.8 V ~ 3.8 V
Current - Transmitting:	8.2mA ~ 126.7mA
Operating Temperature:	-40°C ~ 85°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.Introduction
The EFR32BG1B132F256IM32-C0 is a radio frequency (RF) transceiver IC that is used in a variety of applications and is offered in an array of different package types. The device is optimized for Zigbee and Bluetooth low energy/BLiP standards and has a wide array of features and advanced technologies. This article will discuss the application field, working principle and basic features of the EFR32BG1B132F256IM32-C0.Application Field
The EFR32BG1B132F256IM32-C0 is commonly used in a variety of applications. It is used in home automation and industrial, medical and retail IoT (Internet of Things) applications, among others. It provides low-power, long-range wireless mesh networking; when coupled with on-chip antenna matching, it can be used to create a wide array of network configurations and topologies, including star, tree, peer-to-peer and mesh. This makes it an ideal choice for a variety of applications.Working Principle
The EFR32BG1B132F256IM32-C0 is based on the company\'s EFR32BG1B wireless SoC platform. The EFR32BG1B SoC contains a 2.4 GHz radio frequency transceiver, an efficient 32-bit ARM Cortex M3 microcontroller, and all the necessary peripherals and power supplies, all in one 4 ×4 mm² 24-pin device package. The EFR32BG1B device incorporates a dedicated, pre-engineered multi-protocol stack and a wide variety of digital and analog peripherals. The basic principle of operation for the EFR32BG1B132F256IM32-C0 is based on a transceiver architecture. The chip’s transceiver includes a power amplifier, receiver, and transmitter, which are all connected to the SoC. The power amplifier is used to amplify transmission power and range. The receiver is used to detect signals from other radios, convert them to a digital representation, and provide output to the microcontroller. The transmitter is used to convert digital signals from the microcontroller into analog signals and transmit them to other radios. Basic Features
The EFR32BG1B132F256IM32-C0 has a number of features and capabilities that make it an ideal solution for a variety of applications. It has a Bluetooth 4.2 radio and a 32-bit Cortex M3 microcontroller, allowing it to handle a wide range of communication protocols. It also supports software upgradeability over the air, allowing users to update the firmware and modify the functionality of their system without needing to replace the chip.The device is also power efficient, with an operating current of only 12 mA at 1.8 volts. It is also designed to reduce the size of the power consumption during signal reception. The chip supports both Zigbee and Bluetooth low energy/BLiP protocols, and has an integrated antenna match network that helps reduce the size of antenna designs. Additionally, it has a standby mode that reduces power consumption even further.Conclusion
The EFR32BG1B132F256IM32-C0 is an RF transceiver IC optimized for Zigbee and Bluetooth low energy/BLiP standards. It is used in a variety of applications, including home automation and industrial, medical and retail IoT applications. The device is based on a transceiver architecture and has a number of features and capabilities to allow it to be used in a variety of configurations. It is power efficient and supports software upgradeability over the air, allowing for continued and improved system functionality.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description