EFR32MG1V132F256GM48-C0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Transceiver ICs are electronic parts used in the transmission and reception of radio signals. The EFR32MG1V132F256GM48-C0 is a highly integrated System-on-Chip (SoC) RF transceiver IC designed for low power wireless applications that operate in the 2.4 GHz and Sub-GHz bands. It is a complete integration of the RF Transceiver, Memory, and Microcontroller (MCU) and features a wide selection of peripherals and features for data links and RF/MCU control devices.

The EFR32MG1V132F256GM48-C0 features a low power 2.4GHz radio transceiver that is designed to provide high data rate (up to 3Mbps), low receive sensitivity (down to -102dBm), and ultra-low power operations (down to 7mA). The transceiver includes a full PHY layer receiver, transmitter, demodulator, and modulator, as well as an integrated power amplifier. The integrated memory supports up to 16MB of Flash memory, 8MB of SRAM, and 2MB of OTP memory.

The on-chip MCU of the EFR32MG1V132F256GM48-C0 is optimized for use with very low power applications. It is based on the Cortex-M4 core, featuring a 32-bit instruction set and a very small memory footprint. The embedded microcontroller features a 512kB of Flash memory, 128kB of SRAM, and 8kB of EEPROM memory. In addition, it includes on-chip debug, trace, and real-time clock peripherals. The transceiver also features a host of configurable and integrated peripherals such as SPI, I2C, UART, and USB.

The EFR32MG1V132F256GM48-C0 is designed for a wide range of applications, from short-range wireless communications, to asset tracking, to data logging. Its high level features make it an ideal choice for small form factor embedded systems requiring long battery life and low latency data communications. It is capable of operating under very low power conditions with power consumption as low as 70uA/MHz while enabling high data rate performance.

The EFR32MG1V132F256GM48-C0 is designed to used with existing software stacks for rapid development and integration with existing systems. It supports a wide range of RF protocol stacks such as Blue Nordic BLE, TI-RTOS Bluetooth Low Energy, Wistom 802.15.4, and Zigbee. The on-board peripherals enable applications such as wireless sensor networks, asset tracking, and beacon detection.

In summary, the EFR32MG1V132F256GM48-C0 is a highly integrated System-on-Chip (SoC) RF transceiver IC designed for low power wireless applications operating in the 2.4GHz and Sub-GHz bands. It includes a low power 2.4GHz radio transceiver, memory, on-chip microcontroller, and a host of configurable and integrated peripherals. It is ideal for short-range communications, tracking, and data logging applications. The on-board peripherals, low power consumption, and high data rate performance make this transceiver a valuable addition to the RF Transceiver IC family.

The specific data is subject to PDF, and the above content is for reference