EL0500(TA) Allicdata Electronics
Allicdata Part #:

1080-1189-2-ND

Manufacturer Part#:

EL0500(TA)

Price: $ 0.42
Product Category:

Isolators

Manufacturer: Everlight Electronics Co Ltd
Short Description: OPTOISO 3.75KV TRANS W/BASE 8SOP
More Detail: Optoisolator Transistor with Base Output 3750Vrms ...
DataSheet: EL0500(TA) datasheetEL0500(TA) Datasheet/PDF
Quantity: 1000
6000 +: $ 0.38468
Stock 1000Can Ship Immediately
$ 0.42
Specifications
Output Type: Transistor with Base
Supplier Device Package: 8-SOP
Package / Case: 8-SOIC (0.154", 3.90mm Width)
Mounting Type: Surface Mount
Operating Temperature: -55°C ~ 100°C
Vce Saturation (Max): --
Current - DC Forward (If) (Max): 25mA
Voltage - Forward (Vf) (Typ): 1.5V
Current - Output / Channel: 8mA
Voltage - Output (Max): 20V
Series: --
Input Type: DC
Rise / Fall Time (Typ): --
Turn On / Turn Off Time (Typ): 1.5µs, 1.5µs (Max)
Current Transfer Ratio (Max): 50% @ 16mA
Current Transfer Ratio (Min): 7% @ 16mA
Voltage - Isolation: 3750Vrms
Number of Channels: 1
Part Status: Active
Packaging: Tape & Reel (TR) 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are components that are designed to provide electrical isolation between two circuits. They rely on a light source, usually a light-emitting diode (LED), and a photo detector, such as a photodiode or a phototransistor, to electrically isolate two circuits while allowing them to exchange information. One type of optoisolator is the EL0500(TA), which is a transistor, photovoltaic output optoisolator. This article will discuss the application fields and working principles behind the EL0500(TA).

Application Fields of the EL0500(TA)

The EL0500(TA) optoisolator is very useful in a variety of application fields. It can be used to provide electrical isolation when two circuits need to be electrically isolated but exchange information. For example, it can be used as a voltage-to-control converter, allowing a voltage signal to control a control element, such as a relay, that is wired in series with the optoisolator. In this application, the LED of the optoisolator is wired in series with the control element and the phototransistor converts the voltage signal into a control signal for the control element.

The EL0500(TA) can also be used in AC and DC motor control applications. In these application fields, the optoisolator provides electrical isolation between the motor and the controller, allowing the controller to control the motor safely without potentially damaging the controller. It can also be used to protect sensitive components in a circuit, such as microprocessors, from electrical noise and other electrical disturbances.

Working Principle of the EL0500(TA)

The EL0500(TA) optoisolator consists of an LED mounted on a printed circuit board (PCB) and a phototransistor. The LED is triggered by an applied voltage, which causes the LED to emit a beam of light. This light is detected by the phototransistor, which converts the light into an electric current. This current is then used to drive the electrical load, providing electrical isolation between the input and output circuits.

The EL0500(TA) optoisolator is very efficient in providing electrical isolation between two circuits. It is also cost effective and offers a wide range of current and voltage ratings, allowing it to be used in a variety of applications. Additionally, the optoisolator is highly reliable, as it does not require any mechanical contact between the two circuits, eliminating the possibility of sparking or arcing.

Conclusion

The EL0500(TA) optoisolator is a very useful component that can provide electrical isolation between two circuits. It is widely used in a variety of applications, including voltage-to-control converters, AC and DC motor controllers, and protection of sensitive components. It is also very efficient and cost effective, and offers a wide range of current and voltage ratings. Finally, its lack of mechanical contact ensures a very reliable connection between two circuits.

The specific data is subject to PDF, and the above content is for reference

Related Products
Search Part number : "EL05" Included word is 10
Part Number Manufacturer Price Quantity Description
EL0531(TA)-V Everlight El... 0.37 $ 1000 OPTOISO 3.75KV 2CH TRANS ...
EL0512010000G Amphenol Any... 0.27 $ 1000 TERM BLOCK 350 SOC CLOSE ...
EL0500(TA) Everlight El... 0.42 $ 1000 OPTOISO 3.75KV TRANS W/BA...
EL0530(TA)-V Everlight El... 0.49 $ 1000 OPTOISO 3.75KV 2CH TRANS ...
EL0512000000G Amphenol Any... 0.23 $ 1000 TERM BLOCK 350 SOC CLOSE ...
EL0511530000G Amphenol Any... 0.22 $ 1000 TERM BLOCK HDR 5POS 90DEG...
EL0511520000G Amphenol Any... 0.21 $ 1000 TERM BLOCK HDR 5POS VERT ...
EL0515000000G Amphenol Any... 0.36 $ 1000 TERM BLOCK 350 SOC CLO WF...
EL0515010000G Amphenol Any... 0.42 $ 1000 TERM BLOCK 350 SOC CLO WF...
EL0501(TA) Everlight El... 0.41 $ 1000 OPTOISO 3.75KV TRANS W/BA...
Latest Products
IL5

OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...

IL5 Allicdata Electronics
EL816(S1)(B)(TB)

OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...

EL816(S1)(B)(TB) Allicdata Electronics
EL815(S1)(TB)-V

OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...

EL815(S1)(TB)-V Allicdata Electronics
FOD8153SD

OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...

FOD8153SD Allicdata Electronics
CNY17F3TM

OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...

CNY17F3TM Allicdata Electronics
H11A617DSD

OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...

H11A617DSD Allicdata Electronics