EL5306IUZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

The EL5306IUZ is a low-cost, rail-to-rail input and output, high-speed, 3MHz, 365V/μs, zero-drift operational amplifier.

The EL5306IUZ operates on 5V single power supply and is capable of driving 50Ω loads as low as 3Ω. The EL5306IUZ offers integrated EEPROM that can be programmed with VCC set-points and hysteresis levels. The EL5306IUZ is available in a 16-lead TSSOP package.

The EL5306IUZ application field can include a variety of Audio and Power Management. It is often used in test and measurement applications which require higher precision and fast settling times. It can also be used in amplifier applications such as high resolution electronic instrumentation, battery monitors, motor control and in data acquisition systems.

The EL5306IUZ has a rail-to-rail input range from -5V to +5V. It can drive an output voltage of 5V and 4V off the rails. This rail-to-rail capability enables the device to provide a large signal-handling range and accurate linear low-voltage output signal. The zero-drift amplifier is suitable for low-noise applications such as signal buffers and current-sense amplifiers.

The EL5306IUZ also features an innovative power-down circuitry, where the device can be powered down without any interruption of the output waveform. The device also allows for both input and output adjustment by allowing the user to adjust the VCC set point and hysteresis. This feature can be used to adjust the performance of the device over the entire supply range or in a specific range.

The EL5306IUZ working principle is based on the principle of operation of an operational amplifier. An operational amplifier is a three-terminal device which incorporates two voltage amplifying circuits - one inverting and one non-inverting. The EL5306IUZ has two sets of pins – one for the non-inverting input and one for the inverting input. This enables the amplifier to amplify any input voltage and output the result to the output terminal.

The EL5306IUZ features a slew rate of 365V/μs and a wide gain bandwidth of 3MHz. This makes it suitable for audio applications, as it has very low distortion levels. The amplifier also has a low supply current of only 64μA/amplifier, which helps to reduce the overall power consumption of the system. The EL5306IUZ also features a very low offset voltage of 350μV and a wide common-mode rejection ratio of 90dB. This ensures that the output of the amplifier is accurately amplified and free from noise or other interference.

In conclusion, the EL5306IUZ is a low-cost, rail-to-rail input and output, high-speed, 3MHz, 365V/μs, zero-drift operational amplifier that is suitable for a variety of audio, power management and test and measurement applications. It has a low offset voltage and a wide common-mode rejection ratio that ensure a high-quality output. The device also features a power-down circuitry and can be programmed with VCC set-points and hysteresis levels. In addition, the EL5306IUZ also has a low supply current, which helps to reduce overall power consumption.

The specific data is subject to PDF, and the above content is for reference