EL814S1(A)(TD)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that isolate two circuits electrically while allowing them to interact through the use of light. The EL814S1(A)(TD) is an optoisolator that is commonly used in air conditioning, automotive, and aerospace applications. This optoisolator utilizes a phototransistor as the output and a photodiode as the input.

The EL814S1(A)(TD) is a four-terminal optoisolator device in a 4-pin package. It has a dual die package with a 50mA phototransistor accompanying a 400mV maximum photodiode. The optoisolator is able to transfer analog signals that require isolation and typically operates off of a 9V supply voltage. The voltage gain and output voltage spread of the device is typically above 60V/V and 10V respectively.

The EL814S1(A)(TD) optoisolator works by receiving a signal from an input device and transferring it through a light emitting diode (LED). The intensity of the LED depends on the input signal, so a higher input voltage will cause the LED to produce more light. The light is then picked up by the photodiode, which converts the light into current. The current is then amplified by the phototransistor, which produces an output voltage that is proportional to the input voltage. This feature allows the device to act as a signal amplifier, allowing for longer distances between the input and output devices.

The EL814S1(A)(TD) optoisolator has a wide variety of applications. It can be used as an amplifier in air conditioning, automotive, and aerospace applications, allowing signals to travel over large distances without significant interference. It can also be used to protect circuits from transients, as the optoisolator will not allow an electric pulse to pass through. Additionally, the optoisolator can be used in applications where maintaining a continuous electrical connection is not possible, such as when the input or output are in motion.

In summary, the EL814S1(A)(TD) optoisolator is a four-terminal, dual-die device with a 50mA phototransistor output and a 400mV maximum photodiode input. It is used in air conditioning, automotive, or aerospace applications where long distances between input and output devices or motion of the input or output is required. Additionally, it can protect circuits from transients by not allowing electric pulses to pass through. This versatile optoisolator can be used in a variety of applications that require isolated signal transfer or protection from transients.

The specific data is subject to PDF, and the above content is for reference