EL8201ISZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The EL8201ISZ is an important and reliable instrumentation amplifier that found employed in a variety of applications. This device can provide accurate and stable voltage gain, low noise and high common-mode rejection ratio. It can be used to amplify weak signals in systems such as medical and industrial sensors, data acquisition systems, detecors and audio systems.

The EL8201ISZ is composed of three operational amplifiers, two of which are wired in a classic differential amplifier configuration. The third operational amplifier is used as a high gain voltage follower to realize the high CMRR and voltage gain configuration. The two end terminals of the load resistance are provided for connection with the external power supply, and the input source is measured against the output source. The two middle terminals are for input, and the load resistance typically consists of a resistive voltage divider.

The basic working principle of the EL8201ISZ is quite simple. When the input signal applied is DC,the gain of the instrumentation amplifier is fixed and nearly equal to the product of individual op amp gains. If the input signal is an AC signal, then the gain of the device varies with the frequency of the input signal. This is because the gain of the op amps decrease at higher frequencies. The voltage gain is also determined by the ratio of the resistors. This means that a higher feedback resistor value results in a higher voltage gain.

In addition, the EL8201ISZ can provide a high CMRR and has low noise, which makes it suitable for many applications. It is able to reject signals with common mode voltages that are either ground-referenced or cause impedance coupled to the amplifier\'s input pins. The CMRR can be set to values as high as 80dB using external gain control resistors.

The EL8201ISZ is especially great for applications requiring precision, accuracy, and stable gain. It can be used for tasks such as signal conditioning for biopotential measurements and other low-level measurements. It can also be used in electronic balances, linear sweeps and oscilloscope amplifiers. Other applications include AC and DC measurements and connecting to bridge type sensors.

The EL8201ISZ is a great component to include in almost any circuit requiring accurate and low noise amplification of small signals. It\'s small size and high performance makes it suitable for a range of applications such as medical, industrial, audio and control systems. The device\'s versatility makes it a very viable and important component in any instrumentation amplifier setup.

The specific data is subject to PDF, and the above content is for reference