ELFT13160E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ELFT13160E terminal blocks, headers, plugs and sockets are essential components used in many applications for making and breaking electrical circuits. They are primarily used to connect devices or circuits together temporarily and, in some cases, can be used for permanent wiring. ELFT13160E units are designed for both through-hole (TH) and surface-mounting (SM) applications, and can be used in various applications including telecommunications, industrial controls, and computer systems. In addition, they can be used in applications where connecting and disconnecting of an electrical circuit is quickly and easily required.

Terminal blocks are most commonly constructed of plastic or metal, and are used to join two or more wires together. The blocks (TH or SM) have one or more terminal strips, which contain specific metal contacts in the form of spades, wires or screws, that accommodate the wiring to be connected. The contacts of a terminal block can accept up to 16 AWG (American Wire Gauge) wires depending on the design, and may be packaged with a base plate or on a single-entry, two-wire-leads. Plug-and-socket configurations enable easy connection and disconnection of wires.

In a basic form, the nut-and-bolt terminal block works by inserting the wire into a ferrule or hole. The ferrule can be attached to the wire by using a screw or crimp. Then, when the nut is tightened, it pulls the ferrule hard against the contacts. Another option is a spring-cage terminal block. This style of terminal block contacts directly to the spade or wire, which is then held against the contact by a spring. This type of terminal block is typically used for applications such as controllable switchboxes for lighting and other circuits, timing and phase control, and it is also suitable for use with multiple wire sizes.

In order to facilitate the connection and disconnection of the circuit, the terminal block plugs and sockets should be selected based on the application. Plugs and sockets can be purchased in a range of sizes, shapes and materials. Common materials used for the contacts are brass and nickel silver alloys for high corrosion resistance. Based on their application, they can either be combined with cable glands or be fully insulated. Fully insulated plugs and sockets are designed to be waterproof and will provide maximum protection in high moisture or wet environments.

The working principle of ELFT13160E terminal blocks, headers, plugs and sockets is relatively simple. In applications where electrical circuits are opened and closed, a terminal block, plug or socket allows current to pass through the device in either direction, allowing positive and negative loads to be connected due to the bi-directionality of the device. Additionally, the conductors can be adjusted or replaced without having to disconnect the circuit, contributing to greater durability and efficiency.

In summary, ELFT13160E terminal blocks, headers, plugs and sockets are essential components used in many applications, primarily to connect devices or circuits together. They are designed for both TH and SM applications, and can be connected and disconnected quickly and easily. The working principle of the devices is also relatively simple; they allow current to pass through the device in either direction allowing positive and negative loads to be connected, and the conductors can be adjusted or replaced without having to disconnect the circuit.

The specific data is subject to PDF, and the above content is for reference