EMX3T2R Discrete Semiconductor Products |
|
Allicdata Part #: | EMX3T2RTR-ND |
Manufacturer Part#: |
EMX3T2R |
Price: | $ 0.07 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | ROHM Semiconductor |
Short Description: | TRANS 2NPN 50V 0.15A 6EMT |
More Detail: | Bipolar (BJT) Transistor Array 2 NPN (Dual) 50V 15... |
DataSheet: | EMX3T2R Datasheet/PDF |
Quantity: | 1000 |
8000 +: | $ 0.06410 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Not For New Designs |
Transistor Type: | 2 NPN (Dual) |
Current - Collector (Ic) (Max): | 150mA |
Voltage - Collector Emitter Breakdown (Max): | 50V |
Vce Saturation (Max) @ Ib, Ic: | 400mV @ 5mA, 50mA |
Current - Collector Cutoff (Max): | 100nA (ICBO) |
DC Current Gain (hFE) (Min) @ Ic, Vce: | 120 @ 1mA, 6V |
Power - Max: | 150mW |
Frequency - Transition: | 180MHz |
Operating Temperature: | 150°C (TJ) |
Mounting Type: | Surface Mount |
Package / Case: | SOT-563, SOT-666 |
Supplier Device Package: | EMT6 |
Base Part Number: | *MX3 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The EMX3T2R is a type of Arrays Bipolar Transistor (also known as a BJT). A BJT is a type of semiconductor device used to amplify and switch electronic signals. with three terminals: a collector, a base, and an emitter. While other types of transistors exist, the BJT is the most popular and widely used in modern electronics.
The EMX3T2R is used in various applications, such as low frequency amplifiers, power switching circuits, motor control, and feedback control loops.
The EMX3T2R is constructed differently than other common transistors. It has two separate emission regions that are attached to each collector terminal. This gives the EMX3T2R the ability to increase its current output while maintaining its voltage gain.
The working principle of the EMX3T2R is based on the idea of current flow between the collector and the base. The base is connected to a low voltage source, and the output of the transistor is controlled by the current flow through the base. As current flows through the base, it is amplified by the collector, which is connected to a high voltage source. This increase in voltage output is known as the transistor\'s voltage gain.
The EMX3T2R is often used in low frequency amplifiers to increase the current output of the amplifier while maintaining a high voltage gain. It is also used in power switching circuits to quickly switch high voltages or currents with minimal power losses. The EMX3T2R can also be used in motor control and feedback control loops to reduce power consumption and improve system performance.
In conclusion, the EMX3T2R is a type of Arrays Bipolar Transistor (BJT) used in various applications such as low frequency amplifiers, power switching circuits, motor control, and feedback control loops. Its working principle is based on current flow between the collector and the base. It is used to increase the current output while maintaining a high voltage gain and to switch high volatges and currents with minimum power loss.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
EMX3T2R | ROHM Semicon... | 0.07 $ | 1000 | TRANS 2NPN 50V 0.15A 6EMT... |
TRANS NPN/PNP 45V 0.1A 6DFNBipolar (BJT)...
GENERAL-PURPOSE TRANSISTORBipolar (BJT) ...
GENERAL-PURPOSE TRANSISTORBipolar (BJT) ...
GENERAL-PURPOSE TRANSISTORBipolar (BJT) ...
GENERAL-PURPOSE TRANSISTORBipolar (BJT) ...
IC INTEGRATED CIRCUITBipolar (BJT) Trans...