ES2J R5G

ES2J R5G diode rectifiers are of single type. They are mainly used for AC-DC and reverse DC-DC applications. They are typically used to prevent voltage spikes, to suppress overvoltage and to drive low-voltage DC motors and other applications requiring an AC-DC converter with minimal current drain from the source. The ES2J R5G rectifier is composed of two separate parts: one is the body and the other is the gate. The body is a cylindrical form made with a metal plate coated with a dielectric layer. This dielectric layer is composed of two parts, which are the anode and the cathode. The anode is the outer layer containing the electrical current and the cathode is the inner layer containing the negative charge. In order to work properly, the ES2J R5G rectifier must be triggered by a low-voltage AC or DC source. This can be done by applying a voltage below its rated voltage, typically 0.10 to 0.20 volts from the source. Once the rectifier is triggered, the diode is said to be “on” and current begins to flow between the anode and cathode. The rectifier works by allowing current to flow through the diode in one direction, followed by another diode placed in parallel. The parallel diode is oriented in opposite polarity, allowing it to block the flow of current in the opposite direction. This rectification action forms a rectifier bridge circuit, which is also known as a half-wave rectifier circuit. When a rectifier is “on”, a voltage is developed across its terminals which cause the current to flow in the desired direction. This voltage will depend on the magnitude of the AC or DC source. A lower voltage rectifier will be subjected to higher levels of voltage spikes, while a higher voltage rectifier will be less susceptible to voltage spikes. ES2J R5G rectifiers also have other functions, such as EMC shielding and surge protection. The EMC shield helps reduce EMI and RFI from the rectifier, while the surge protection helps to protect against sudden spikes in the input voltage. In conclusion, ES2J R5G rectifiers are a useful component for many AC-DC and reverse DC-DC applications. They offer EMC shielding, surge protection and low-voltage triggering. They are typically used to prevent overvoltage and to drive low-voltage DC motors and other AC-DC converters.

ES2JTR	SMC Diode So...	0.06 $	1000	DIODE GEN PURP 600V 2A SM...
ES2J-LTP	Micro Commer...	--	5000	DIODE GEN PURP 600V 2A DO...
ES2JA M2G	Taiwan Semic...	0.06 $	1000	DIODE GEN PURP 600V 2A DO...
ES2JA R3G	Taiwan Semic...	0.08 $	1800	DIODE GEN PURP 600V 2A DO...
ES2JAHR3G	Taiwan Semic...	0.08 $	1000	DIODE GEN PURP 600V 2A DO...
ES2JAHM2G	Taiwan Semic...	0.07 $	1000	DIODE GEN PURP 600V 2A DO...
ES2J R5G	Taiwan Semic...	0.11 $	15300	DIODE GEN PURP 600V 2A DO...
ES2JHR5G	Taiwan Semic...	0.11 $	1000	DIODE GEN PURP 600V 2A DO...
ES2JHM4G	Taiwan Semic...	0.1 $	1000	DIODE GEN PURP 600V 2A DO...
ES2J M4G	Taiwan Semic...	0.09 $	1000	DIODE GEN PURP 600V 2A DO...