Allicdata Part #: | ET2.0-62-F3-ND |
Manufacturer Part#: |
ET2.0-62-F3 |
Price: | $ 0.00 |
Product Category: | Fans, Thermal Management |
Manufacturer: | Laird Technologies - Engineered Thermal Solutions |
Short Description: | THERMOELECT |
More Detail: | Peltier Module |
DataSheet: | ET2.0-62-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | CP |
Part Status: | Obsolete |
Outline L x W x H: | -- |
Qmax @ Th: | -- |
Delta Tmax @ Th: | -- |
Operating Temperature: | -- |
Features: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thermoelectric modules are a class of devices that transfer thermal energy into electrical energy. The ET2.0-62-F3 is one such module whose purpose is to cool electronic components. It is designed for relatively large loads and works by pumping heat at one end while drawing heat from the other. This results in a localised temperature difference, allowing the module to achieve temperatures as low as -15°C and as high as 120°C depending on the heat flux.
The module is constructed in two parts – a vertical block of thermoelectric material (Peltier material) and the interface circuit. At the interface, the module is connected to a DC power source, such as an ATX power supply. The thermoelectric material works on the principles of Peltier cooling; when a current is applied to the material, heat is removed from one side and transferred to the other.
The module is thermally isolated by two thin plates of copper, which are placed on either side of the transistors and form the current-carrying wire. This isolates the two sides of the module and prevents the heat exchange between the two. The heat exchange between the two sides occurs through the Peltier material itself. At each end, a thermistor is included to measure the temperature.
The cooling power of the ET2.0-62-F3 can be regulated through the choice of the voltage and the current. Depending on the configuration, the module can cool down an electronic component up to 20kW. The module can be used in a wide range of applications, from refrigerators and freezers to semiconductor production and data centre cooling.
The ET2.0-62-F3 can also be used as an energy recovery device, to convert waste heat into usable electricity. In this application, a cooling fluid is circulated through the system, absorbing the excess heat from the module and cooling the electronic components being cooled.
The module is controlled using a microcontroller. The microcontroller determines the temperature of the device and can adjust the current and voltage accordingly. The module also has an over-heat protection mechanism, which will shut the module down in case the temperature of the module exceeds a certain limit.
The ET2.0-62-F3 is a versatile and efficient thermoelectric module. It has a wide range of applications and can be used to efficiently cool electronic components, or to produce usable electrical energy. The module is controlled by a microcontroller and is thermally isolated, making it a reliable thermoelectric device.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ET2.0-17-F1A | Laird Techno... | 0.0 $ | 1000 | THERMOELECTPeltier Module |
ET2.0-18-F2A | Laird Techno... | 0.0 $ | 1000 | THERMOELECTPeltier Module |
ET2.0-31-F2A | Laird Techno... | 0.0 $ | 1000 | THERMOELECTPeltier Module |
ET2.0-62-F3 | Laird Techno... | 0.0 $ | 1000 | THERMOELECTPeltier Module |
ET2.0-65-F2A | Laird Techno... | 0.0 $ | 1000 | THERMOELECTPeltier Module |
ET2.0-7-F1A | Laird Techno... | 0.0 $ | 1000 | THERMOELECTPeltier Module |
ZT8,12,F1,4040,TB,EP,W8Peltier Module 40...
MULTISTAGE TEM 6.6X6.6X5.38MMPeltier Mod...
PELTIER, 30 X 30 X 3.95 MM, 6 A,Peltier ...
MOD THERMO ELEC COOLER TEC104904Peltier ...
HEATERPeltier Module
HEATERPeltier Module