EV1HMC347ALP3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Evaluation and Development Kits, Boards comprises of components and circuits that perform the function of testing and developing radio frequency related systems and applications. Specifically, the EV1HMC347ALP3 is a compact transceiver kit which works on the Bluetooth Low Energy (BLE) protocol, and is commonly used for blutooth testing and development. The EV1HMC347ALP3 transceiver kit works in the ISM band of 2.4GHz, and contains a comprehensive set of test and measurement instruments.

At the core of the transceiver kit lies a multi-mode transceiver which operates at speeds up to 1Mbps. This transceiver supports both Class 1 and Class 2 operation in the ISM band. The transceiver is powered by an ARM Cortex M3 MCU which contains 256KB of flash memory and 64KB of RAM for code and data storage. The MCU also supports Bluetooth 4.0 HCI, GATT, and Piconet profiles.

The transceiver is connected to a simple and compact RF printed circuit board (PCB) which comprises several of the necessary filters and components needed for radio frequency signal transmission and reception. The PCB also contains the necessary matching networks and impedance adjustments which are required for proper transceiver operation. Additionally, the PCB supports a wide variety of antenna designs which can be used for specialized applications.

The kit also contains an on-board battery-powered UART controller which can be used for communicating with the transceiver and other Bluetooth enabled devices. The UART controller includes a USB interface for PC connectivity. This allows direct control of the transceiver from a PC or other external device.

The EV1HMC347ALP3 also contains a wide range of other instruments such as a power supply, a programmable logic controller (PLC), and a selector switch. The power supply enables the transceiver to be powered either directly from the battery or via the USB port. The PLC is used to control the operation modes of the transceiver, which determine when it is in receive mode, transmit mode, or standby mode. The selector switch allows the user to select between either the direct power or USB connection for powering the transceiver.

In terms of applications, the EV1HMC347ALP3 transceiver kit is most commonly used in connection with Bluetooth low energy (BLE) devices. These devices enable the low-power communication between two or more systems in both indoor and outdoor environments. Such systems are used in healthcare, automotive, and smart home applications, among others.

In conclusion, the EV1HMC347ALP3 transceiver kit is an indispensable tool for the development and testing of Bluetooth Low Energy systems and applications. The kit enables the rapid testing and implementation of BLE systems in a variety of applications. It comes with a wide range of test and measurement instruments which allow for the accurate measurement of radio frequency signals, the optimization of antenna designs, and the debugging of BLE systems.

The specific data is subject to PDF, and the above content is for reference