EV1HMC545A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EV1HMC545A, as a RF Evaluation and Development Kit, is adopted by many engineers and designers to evaluate and develop various RF systems. It is a high-performance board with integrated cellular platform, which is mainly used in short-range communications such as cellular, WiMAX, Bluetooth, Antenna Matching, and MIMO Wireless Telemetry.

The EV1HMC545A board contains an embedded MCU, an ARM Cortex-M0 processor, and a baseband system featuring a combined RF front-end and a RF transceiver. This is suitable for 4G LTE/3G/2G cellular applications. It is also an ideal development tool for embedded radio protocols.

On the EV1HMC545A board, the RF transceiver is coupled to the MCU via an external UART IO port and a 10/100 Mbps Ethernet port. The processor controls the operation of the RF transceiver, providing hard real-time control over the operating parameters of the RF transceiver. This allows for tight timing control and packet processing. The processor also monitors system performance, reporting any errors associated with the system.

The board is powered by an AC adapter and can be powered up or down without the need for manual intervention. In addition, it has an integrated DC-DC converter to supply power to the embedded system, since the DC-DC converter minimizes power losses and ensures the board can run efficiently even in harsh industrial environments.

The working principle of the EV1HMC545A board is based on a combination of sophisticated hardware and software that enable the radio transceiver to communicate over either short range or wired links.

The radio transceiver has the ability to receive and transmit data over the air using a range of two-wire protocols. The MCU receives the data through signals that are picked up by the RF transceiver, decodes the data, and then sends it to the connected external device through a UART interface.

The RF transceiver also has the ability to perform frequency conversions. It can convert emitted signals from the base frequency to a higher frequency that is compatible with the system in use. It can then convert received signals to the same base frequency and transmit them to the MCU for processing.

The EV1HMC545A board also contains embedded tuning parameters that allow users to customize it according to their requirements. It supports local oscillation control and gain control for fine-tuning of the radios for improved performance under different operating conditions. Additionally, it has automatic calibration features to ensure that the output power remains consistent even under varying operating conditions.

The EV1HMC545A board can also be used to connect to a wide range of external devices. Through its 10/100 Mbps Ethernet port, it can be connected to almost any type of device, including servers, computers, smartphones, and tablets.

The application field and working principle of the EV1HMC545A board can be easily understood by engineers and designers from the different fields. It is suitable for a wide range of applications, including cellular, WiMAX, Bluetooth, Antenna Matching, and MIMO Wireless Telemetry. Its high performance, combined with its low cost, make it a perfect evaluation and development board for any project.

The specific data is subject to PDF, and the above content is for reference