Allicdata Part #: | 480-2701-ND |
Manufacturer Part#: |
EVN2000C |
Price: | $ 0.00 |
Product Category: | Switches |
Manufacturer: | Honeywell Sensing and Productivity Solutions |
Short Description: | SWITCH SNAP ACTION DPST 6A 120V |
More Detail: | N/A |
DataSheet: | EVN2000C Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Ingress Protection: | IP66/67 - Dust Tight, Water Resistant, Waterproof |
Mechanical Life: | 10,000,000 Cycles |
Electrical Life: | 100,000 Cycles |
Operating Position: | 1.100" (28.0mm) |
Operating Temperature: | -25°C ~ 85°C |
Overtravel: | 0.158" (4.0mm) |
Differential Travel: | 0.040" (1.0mm) |
Pretravel: | -- |
Release Force: | -- |
Operating Force: | 1428gf |
Features: | -- |
Series: | EVN2000 |
Termination Style: | Cable Leads |
Mounting Type: | Chassis Mount |
Actuator Type: | Roller Plunger |
Voltage Rating - AC: | 120V |
Current Rating: | 6A (AC) |
Switch Function: | On-Mom, Off-Mom |
Circuit: | DPST-NO/NC |
Part Status: | Obsolete |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
EVN2000C application field and working principle
The EVN2000C is a high-precision low-cost snap action and limit switch. This product can be used for a wide range of industrial, manufacturing and transport systems. These applications include: home security systems, door openers, light switch regulators, brakes and stop buttons and other industrial and consumer applications. The working principle of this switch is based on a snap action mechanism, which operates when the button is pressed. This action causes the switch contacts to open or close, depending on the setting of the switch, thus initiating the application.
The snap action and limit switches of the EVN 2000C are based on reliable and superior technology. The contact mechanism is a simple mechanical switch which can detect brief changes in the electrical signal. The switch works on a snap-action principle where the physical contact of the switch with the load is the only action that needs to be done. This helps reduce the need for manual adjustments and allows the system to self-regulate itself.
The switch can be configured in various ways and set for different applications. Some of these are positive or negative action mode, detent action and even alternative switching. This allows for easy conformation to the application for which it is being used for. The switch can also be used to initiate a specific action from any external source. This could include a pressure sensor, vibration or temperature source.
The construction of the switch is usually composed of two internal parts. These include the main body of the switch, which houses the micro-controller, and the printed circuit board (PCB) which contains the necessary components. There is also a metal collar housing the contact spring and the contact points which control the switch\'s functioning. All this makes the assembly light weight and cost effective.
The snap action and limit close can operate over a wide range of temperature and pressure. This helps to ensure accuracy and stability of the product, which is important in applications where reliability and safety are paramount. Additionally, the switch can be programmed to operate over a wide range of timeframes, depending on the application. This helps provide an effective and accurate performance.
The EVN 2000C snap action and limit close switches provide a reliable and simple solution for a wide range of industrial and consumer applications. They are easy to install, operate and configure. They are also cost effective and provide good performance in a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V