EZE240D12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid state relays refer to the relays that do not use traditional switch contacts to connect and disconnect circuits, but instead use transistors, thyristors, and other solid-state components. They are widely used in industry because of their small size, high capacity, long life, high working frequency, and insensitive to shock and vibration. The EZE240D12 is an example of a Solid State Relay.

The EZE240D12 is a two-channel type Solid State Relay (SSR) with a strong load capability, high switching speed, and high dielectric strength. It is widely used in industrial applications as a control element for controlling and regulating temperatures, illumination, speed, and other electrical parameters. In addition, it is also used in consumer electronics such as switching and controlling power supply, lighting, etc.

The EZE240D12 is based on a single-phase thyristor principle. It is composed of a thyristor, a diode, and an opto-isolator. The thyristor is the main component of this SSR and has two state: turn-on (conductive), turn-off (non-conductive). The opto-isolator is used to isolate the input and output terminals of SSR from each other. The diode is an overcurrent protection device and acts to protect the thyristor from overvoltage.

The working principle of the EZE240D12 is very simple. When the input voltage is below the control voltage, the opto-isolator will remain in the reverse bias state and will not transmit current. When the input voltage is higher than the control voltage, the opto-isolator will be forward biased and will allow the thyristor to conduct. At this point, the thyristor will turn on and allow the current to flow from input to output. This will cause the output of the relay to switch on. When the input voltage is lower than the control voltage, the opto-isolator will again become reverse biased, and the thyristor will turn off, causing the output to switch off.

The EZE240D12 Solid State Relay is highly reliable and has a large number of applications in industrial and consumer products. It is used in motor control, boilers, medical electromechanical equipment, automated production lines, and many other industrial and consumer electronics. Its simple operations make it an ideal choice for those seeking low maintenance operational costs.

The specific data is subject to PDF, and the above content is for reference