F1857RD1600

Series:	--
Packaging:	Bulk
Part Status:	Not For New Designs
Diode Configuration:	1 Pair Series Connection
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	1600V
Current - Average Rectified (Io) (per Diode):	55A (DC)
Voltage - Forward (Vf) (Max) @ If:	1.4V @ 165A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Operating Temperature - Junction:	-40°C ~ 125°C
Mounting Type:	Chassis Mount
Package / Case:	Module
Supplier Device Package:	Module

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Arrays

The F1857RD1600 is a rectifier array, commonly used as a single phase, 3-ampere, 1600 volt, negative/positive common anode bridge rectifier. This device is made up of an array of diodes, arranged in a diode bridge configuration, which convert AC power to DC power.A diode is a two-terminal electronic component which allows current to flow in one direction and blocks current flow in the opposite direction. They are used in many applications and are made up of a variety of materials depending on the desired application. A rectifier is an electronic device which converts alternating current (AC) to direct current (DC). Rectifiers are often used in power supplies to convert AC power to DC power. The F1857RD1600 is a full-wave bridge rectifier, meaning that it consists of four diodes, arranged in a bridge configuration, which together convert AC power to DC power. Rectifier arrays allow for a single device to be used as a full-wave bridge rectifier, rather than the larger and more expensive four-diode configuration. With four diodes in the array, the incoming AC voltage is connected directly to two of the diodes, and the output is connected across the load. The other two diodes of the array in this configuration are reverse bias diodes and are therefore blocked from conducting. This particular device is capable of handling up to 1600 volts, making it suitable for use in many industrial applications, such as high-voltage power supplies, uninterruptible power supplies, inverters, motor and charger controllers and any other applications which require a rectified, static DC voltage.The F1857RD1600 can also be used in automotive applications such as in alternators, automatic transmission control systems and motor controllers, which require dynamic DC voltage. It is also suitable for use in electronic devices such as televisions, computers and consumer electronics, as well as medical equipment, PA systems and electrical heating systems.This rectifier array is made up of an array of diodes, which are arranged in a diode bridge configuration. This configuration consists of two input diodes, connected in series and two output diodes, connected in parallel. When AC power is applied to the input, the two input diodes conduct in alternate half-cycles, allowing current to flow through the bridge to the output. The two output diodes, which are reverse bias diodes, remain blocked and therefore do not conduct.The F1857RD1600 rectifier array is a single-phase, 3-ampere, 1600 volt, negative/positive common anode bridge rectifier. The device is capable of handling up to 1600 volts, making it suitable for use in many industrial and automotive applications. The device is made up of an array of diodes, arranged in a diode bridge configuration, which is capable of converting AC power to DC power. This device is used in many applications, such as power supplies, uninterruptible power supplies, inverters and motor and charger controllers, as well as automotive applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description