Allicdata Part #: | F6QG1G842P2KD-J-ND |
Manufacturer Part#: |
F6QG1G842P2KD-J |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | Taiyo Yuden |
Short Description: | FILTER SAW 1.842GHZ 5SMD |
More Detail: | N/A |
DataSheet: | F6QG1G842P2KD-J Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Series: | F6 |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Frequency - Center: | 1.842GHz |
Moisture Sensitivity Level (MSL): | -- |
Bandwidth: | 75MHz |
Insertion Loss: | 3.2dB |
Ratings: | -- |
Applications: | CDMA, WCDMA, LTE |
Mounting Type: | Surface Mount |
Package / Case: | 5-SMD, No Lead |
Height (Max): | 0.020" (0.50mm) |
Size / Dimension: | 0.043" L x 0.035" W (1.10mm x 0.90mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
SAW (Surface Acoustic Wave) filters are some of the microwave components that are being commonly used in communication systems. It is a type of filter which, as the name implies, works by utilizing an acoustic wave that is traveling over the surface of two substrates. These two substrates are usually made of material such as quartz, aluminum nitride, piezoelectric ceramic, or diamond.
The specific component being examined here is the F6QG1G842P2KD-J and its application field and working principle will be described. This SAW filter is a three-terminal component which is designed to provide a band pass filter. It is a low power device which operates between the frequencies of 8 GHz and 9 GHz.
The typical applications of this SAW filter can be found in radio link systems, in which this filter is used for frequency limitation as well as for signal direction. In addition, this SAW filter is also well-suited for use in wireless systems, satellite terminals, base stations, and other high-frequency applications. In all of its applications, the main purpose of the SAW filter is to suppress unwanted frequencies and pass desired signal frequencies.
The working principle of the F6QG1G842P2KD-J is based on the principles of surface acoustic waves (SAWs). As mentioned before, the two substrates through which the acoustic wave is traveling are typically constructed from quartz, aluminum nitride, diamond, or other materials. Interdigital transducers (IDs) made of metal electrodes are then placed onto the surface of the two substrates.
The IDs then act as a generator and detector of the SAW and when an input signal is applied to the ID transducers, the latter converts this electrical energy to acoustic energy, propagating a surface wave over the substrate. The SAW wave then interacts with the ID transducers, generating an output signal, which is then filtered to obtain the desired frequency response.
In addition, SAW filters can provide components such as phase shifters and impedance transformers, making them more useful and versatile than other types of filters. The circuitry of the F6QG1G842P2KD-J is specifically designed to reject unwanted frequencies while passing desired frequencies, allowing for a better signal quality.
In conclusion, the F6QG1G842P2KD-J is a SAW filter which works on the principles of surface waves and is designed to provide a band pass filter, rejecting unwanted frequencies while passing desired signal frequencies in high-frequency applications such as radio link systems, wireless systems, satellite terminals, and base stations.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
F6QG2G140P2KA-J | Taiyo Yuden | -- | 1000 | FILTER SAW 2.14GHZ 5SMD |
F6QG1G842P2KD-J | Taiyo Yuden | -- | 1000 | FILTER SAW 1.842GHZ 5SMD |
F6QG1G960P2KT-J | Taiyo Yuden | -- | 1000 | FILTER SAW 1.96GHZ 5SMD |
FILTER SAW 73.5996MHZ 10SMD
FILTER SAW
FILTER SAW
FILTER SAW
FILTER SAW
FILTER SAW