F6QG1G960P2KT-J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A surface acoustic wave (SAW) filter is an electronic filter used in numerous consumer electronics and communication systems. SAW filters are typically made of a piezoelectric substrate material, such as quartz, upon which a thin film pattern of interdigital and/or combline electrodes has been laser ablated. These filters are widely used in RF communication and wireless systems for a variety of purposes.

The F6QG1G960P2KT-J is one such SAW filter that is designed for application in RF frequency front-end systems. It has a center frequency of 960MHz and an insertion loss of 4.5dB. The filter has a wide passband with a 3dB bandwidth of 30MHz and a 20dB rejection of 43.5MHz. The filter can also be used in a variety of applications such as satellite receiver systems, wireless local area network systems, and FM and AM tuners.

The F6QG1G960P2KT-J filter works by filtering incoming signals according to their frequency. It consists of electrodes on the surface of its quartz substrate. These electrodes are connected to the input and output ports of the filter, and they generate an alternating electric field on the surface of the substrate. When an incident signal wave passes through the filter, the electric field created by the electrodes exerts a force on it. This force alters the transverse displacement of the wave, resulting in a change in the amplitude and phase of the signal.

Additionally, the SAW filter uses diffraction to further improve its filtering functions. When the incident wave reaches one of the electrodes, it is reflected back off the electrode while also being deflected at an angle. This angle of deflection is dependent on the frequency of the wave. Waves with frequencies close to the center frequency will be diffracted at a lower angle than waves that are further away from the center frequency.

The combination of the electric field and diffraction effects cause the different frequency components of an incident signal to be attenuated at different levels. This allows the F6QG1G960P2KT-J filter to perform selective filtering functions, allowing only the frequencies near the center frequency to pass through. The result is a signal that has been filtered according to the desired specifications.

The F6QG1G960P2KT-J SAW filter is a versatile and reliable filter that can be used in a variety of applications. Its wide passband and high rejection level make it an ideal choice for many RF systems. Additionally, its ability to filter signals according to their frequency makes the F6QG1G960P2KT-J filter an attractive option for most wireless systems.

The specific data is subject to PDF, and the above content is for reference