F930J476MBABE1 Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are a type of electrolytic capacitor that uses a tantalum foil anode, covered with an insulating oxide layer, as one of its electrodes. This layer is formed by anodization, an electrolytic process. Its anode is made from a sintered tantalum pellet, which acts as a pseudocontinuous electrolyte, meaning it has an extremely large surface. Its cathode is made from a layer of electrodeposited manganese dioxide, which increases the area where a current can be drawn from. The F930J476MBABE1 is an example of a tantalum capacitor that can be used in a variety of applications.

The F930J476MBABE1 is a tantalum capacitor with a capacitance value of 470uF and a rated operating temperature of 85°C. The typical maximum ripple current is 1.375A and the maximum ESR value is 0.125 ohms. It has a voltage rating of 6.3V and a tolerance of ±20%. This capacitor is suitable for use in a range of applications, including in DC-DC converters and in biomedical instrumentation.

The F930J476MBABE1 is a polarized capacitor, meaning that it has a positive and negative terminal. It is capable of working in both AC and DC circuits, but due to its polarized nature, the correct polarity needs to be observed. If it is inserted with the wrong polarity, it may cause a short circuit. If a short circuit occurs, the capacitor can become extremely hot, leading to potential damage of components in the circuit.

The working principle of the F930J476MBABE1 is relatively simple. At a certain applied DC voltage, the capacitor will develop a certain capacitance. When an AC signal is applied, the capacitor stores electrical charge and discharges it depending on the frequency of the signal. This discharge oscillates, which is why the F930J476MBABE1 is used in pulse circuits. This capacitor is also often used to act as a filter, which helps to suppress the high frequency noise while keeping the DC level unchanged, making it an effective noise suppressor.

The F930J476MBABE1 is a reliable, efficient, and cost-effective capacitor that can be used in a variety of applications. Its capacitance and voltage ratings make it suitable for use in DC-DC converters, while its high frequency suppression abilities make it suitable for use in noise suppression. Its simple working principle makes it relatively easy to use, allowing it to be used in a range of different circuits.

The specific data is subject to PDF, and the above content is for reference