F951A335MPAAQ2 Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are a type of solid electrolytic capacitor which utilizes tantalum pentoxide as its dielectric material. The F951A335MPAAQ2 is a specific type of tantalum capacitor which is a surface mount chip capacitor.The F951A335MPAAQ2 is a polarized capacitor, which implies that it must be installed the correct way round in order to operate correctly. The positive lead is marked with a (+) symbol on the side of the capacitor, whereas the negative lead is marked by a (-) symbol.

In terms of its application field and working principle, the F951A335MPAAQ2 is mainly employed as a decoupling or bypass capacitor, or a filtering capacitor. Its role is to store charge and thereby reduces current fluctuations, level out voltage fluctuations, and to provide a local reserve of energy capacity.

The F951A335MPAAQ2 has a wide range of applications ranging from mobile phones, computers, audio and video equipment and automotive systems. When such devices operate, due to the varying current loads, particularly as digital devices switch on and off, the on-board voltage source can experience high frequency transients. The F951A335MPAAQ2 is connected in parallel with the load and is used to “statically” store the charge that is needed for peak current draw, ensuring voltage stability and providing a local current reserve.

The F951A335MPAAQ2 is also widely used in power supplies circuits as a filtering capacitor. During the operation of switching and linear power supplies, voltage ripples appear on top of the main voltage because of fluctuations occurring on the electric circuits. The capacitor acts as an energy buffer, providing the electric current needed to stabilize the voltage.

In both decoupling and filtering applications, the value of the capacitor installed should be typically be between 1μF and 100μF, the value depending on the required stability, transient response and filtering specifications, with 10μF being the most common value.

In terms of its operation principle, the F951A335MPAAQ2 utilizes the physical property of capacitance; capacitance is a measure of the ability of a capacitor to store and release electric charge. An electrolytic capacitor consists of two metal electrodes, between which there is a dielectric material. Thus, when electric current is applied to the two terminals, a charge is stored on the capacitor plates. The dielectric material acts as an insulator, and will not allow the electric current to pass.

The F951A335MPAAQ2 is a special type of capacitor and utilizes tantalum pentoxide as the insulation material. A special electrolyte is used to provide the electronic conduction in order to transfer the charge from one metal layer to the other. The dielectric material employed for tantalum capacitors tend to have higher thermal reliability than other types of capacitors, as well as having a lower leakage rate.

The available capacitance offered by the F951A335MPAAQ2 range from 0.47µF up to 33µF, with the corresponding capacitance having tolerance ratios of 5%, 10% and 20%. Since it is a surface mount chip capacitor, the size of the F951A335MPAAQ2 is relatively small and compact.

In conclusion, the F951A335MPAAQ2 tantalum capacitor is a surface mount chip capacitor which offer high thermal reliability, low leakage rate and small size. Its primary application is as a decoupling or bypass capacitor, providing voltage stability and local current reserve. It is also widely used as a filtering capacitor in power supply circuits, reducing voltage ripples.

The specific data is subject to PDF, and the above content is for reference