FAN4858TZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The FAN4858TZ is a high-efficiency, low-cost, DC-DC buck switching regulator from Fairchild Semiconductor. It is intended for applications where high efficiency and cost are both primary considerations. It is capable of delivering up to 6A output current, and features a low 25 mV voltage drop across the switch when operating at the maximum load current. Additionally, the integrated soft-start circuitry minimizes the inrush current which helps to provide a more efficient and smoother power delivery to the system.

The FAN4858TZ operates with a wide range of input voltages, from 4.5V to 28V, and is capable of regulating the output voltage to within 0.5% accuracy over temperatures ranging from -40°C to +125°C. It is capable of operating in forced continuous mode, and also has the option of shutdown mode to reduce power consumption when the device is not in use. Additionally, the internal over-temperature and over-current protections ensure reliable operation at all times.

The FAN4858TZ utilizes synchronous-rectification MOSFETs to reduce power losses and improve efficiency. The switching frequency can be adjusted, via a resistor-programmable frequency range from 300kHz to 2 MHz, depending on the load conditions and requirements. The FAN4858TZ also features a pulse-width modulation (PWM) mode for skip-cycle control, an input current limit mode, and an output overload protection.

The FAN4858TZ is ideal for powering small, portable and power-sensitive products, such as 3G/4G and Wi-Fi cellular phones, Bluetooth/Wi-Fi modules and portable consumer electronics. It is suitable for a wide variety of applications such as portable computers, game consoles, GPS trackers, vehicle electronics, automotive lighting systems, and industrial control and instrumentation equipment.

The FAN4858TZ switching regulator works by converting a higher DC input voltage to a lower constant output voltage, using a power switch. In the case of the FAN4858TZ, the power switch is a n-channel MOSFET. When a higher voltage is supplied to the input, the MOSFET switches rapidly between the on and off states. On the low side, a diode is connected in parallel with the power switch. The diode is off when the MOSFET is on, conducting current from the source to the load. In the off state, the diode conducts current from the load back to the input voltage.

To control the MOSFET and determine the power efficiency, a voltage control loop is used. This loop provides feedback to switch between the two states according to the input voltage and output current. This feedback loop is referred to as the “On/Off” loop. The duty cycle of the switch is adjusted according to the amount of desired output current, and the frequency is regulated to maintain the required output voltage. The switching frequency is determined by the output voltage and output current demands.

The FAN4858TZ is a great choice for cost-sensitive designs, offering high-efficiency, low-cost and high-output current switching. Its features make it ideal for applications that demand reliable, low voltage and output current accuracy, such as cellular phones and other portable electronics. With its wide operating range, it is also suitable for automotive and industrial applications.

The specific data is subject to PDF, and the above content is for reference