FAP8WWMIDLCZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

When discussing the application field and working principle of FAP8WWMIDLCZ (Field Applied Pulse 8KV Wood’s Metal Ionic Dissolution with Laser Controlled Zinc Plating), it is useful to first look at the various components of the system. Generally, it consists of a high voltage pulse generator, a pulse shaper, a laser beam delivery system, a pulse delay device, a damping device, a Wood’s metal ion solution chamber, and a Zinc plating station.

The purpose of a high voltage pulse generator is to deliver a high-pressure impulse with an amplitude of up to 8KV peak and a duration of about 10ns. This generator should have an output current waveform with fast rise time, maximum peak power, and a fall time that is well controllable to ensure that the components of the system such as the voltage pulse shaper and the laser beam delivery system operate correctly. The pulse shaper is used to ensure that the generated pulses can be accurately modulated according to the specific requirements of the process.

The laser beam delivery system serves as a tool for controlling the pulse duration of each pulse. By allowing the laser beam to travel along the chamber walls, the desired pulse duration can be easily determined and manipulated. The pulse delay device is used to control the time intervals between successive pulses. This is an important feature of the system since each pulse should be able to travel across a pre-specified distance along the chamber walls in the predetermined delay time.

The damping device is used to ensure that the generated high pressure pulses have very little residual energy after reaching the Wood’s metal ion solution chamber. This is because an excessive amount of residual energy can disturb the dissolution process and may have undesirable effects. The Wood’s metal ion solution chamber is the essential component of the process as it contains the Wood’s metal ions that are to be dissolved in order to create a fine film of zinc plating on the components.

The zinc plating station contains all the components required for the process. It will contain the Wood’s metal ion solution containing the dissolved zinc ions, a metallic base for plating, a source of power for energizing the process, and other related equipment. All of these components are connected together in such a way as to ensure that the zinc ions in the solution are evenly distributed and that they can adhere to the metallic base without any bubbles or other undesired phenomenon.

The process of depositing a zinc coating on a metallic surface using the FAP8WWMIDLCZ system is very reliable and reliable in terms of quality and duration of the plating and is therefore widely used in the manufacturing industry. Furthermore, this process is relatively easy to operate, is versatile and can be adapted to a variety of scenarios and conditions. It is no surprise then that the FAP8WWMIDLCZ system is becoming increasingly popular among manufacturers all over the world.

The specific data is subject to PDF, and the above content is for reference