Allicdata Part #: | FCA433RJ-ND |
Manufacturer Part#: |
FCA433RJ |
Price: | $ 0.10 |
Product Category: | Resistors |
Manufacturer: | TE Connectivity Passive Product |
Short Description: | RES 33.0 OHM 4W 5% RADIAL |
More Detail: | 33 Ohms ±5% 4W Through Hole Resistor Radial Flame ... |
DataSheet: | FCA433RJ Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.08954 |
Series: | FC, CGS |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 33 Ohms |
Tolerance: | ±5% |
Power (Watts): | 4W |
Composition: | Wirewound |
Features: | Flame Retardant Coating, Safety |
Temperature Coefficient: | -80/ +40ppm/°C |
Operating Temperature: | -55°C ~ 200°C |
Package / Case: | Radial |
Supplier Device Package: | -- |
Size / Dimension: | 0.197" Dia x 0.953" L (5.00mm x 24.20mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors
Through hole resistors are a type of electrical component made of a single physical resistance element. This element is typically a cylindrical ceramic rod, although any type of conductive material may be used. Through hole resistors can be used in a wide variety of applications, from consumer-level electronics assembly to large-scale industrial equipment.
FCA433RJ Applications
The FCA433RJ is a through hole resistor used in printed circuit board (PCB) applications where high power resistance is required. The FCA433RJ offers a power rating of 100 watts, making it suitable for high current circuit designs. It is also designed with a low thermal resistance, allowing it to maintain its temperature stability even at higher current levels. The FCA433RJ is commonly used in industrial and laboratory applications, such as motor control, temperature measurement, switching power supplies, and amplifier circuits.
Working Principle
Through hole resistors operate on the principle of an electrical current flowing through a resistance element. The current causes thermal energy to be dissipated in the material, and the amount of thermal energy determines how much of the current is dissipated as heat. This heat is then absorbed by the resistor\'s external heat sink, preventing it from overheating. By controlling the current through the resistor, the power dissipated can be accurately controlled and regulated.
Advantages
The use of through hole resistors offers many advantages compared to other types of resistors. Through hole components are usually more reliable and easier to assemble than surface mount components, due to their larger physical size and greater durability. In addition, through hole resistors generally require less space on a PCB than their surface mount counterparts, making them ideal for use in designs where space is limited. Finally, since through hole components are more expensive than their surface mount equivalents, they can offer improved electrical performance at a lower cost.
Disadvantages
The main disadvantage of through hole resistors is their increased cost compared to surface mount components. Additionally, they are more difficult to assemble, as they require more precise drilling and soldering. For these reasons, they are generally not used in high-volume applications. Finally, through hole resistors are not as fast or as accurate as surface mount components, which means they are not suitable for use in high speed or precision applications.
Conclusion
The FCA433RJ is a through hole resistor designed for use in high power PCB applications. It has a power rating of 100 watts and a low thermal resistance which makes it suitable for high current circuits. Through hole resistors offer many advantages over surface mount components, such as improved reliability, easier assembly, and improved electrical performance at a lower cost. However, they are more expensive and less precise than their surface mount counterparts, making them unsuitable for high-volume or high-speed applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
FCA47N60 | ON Semicondu... | -- | 1000 | MOSFET N-CH 600V 47A TO-3... |
FCA47N60-F109 | ON Semicondu... | 9.58 $ | 1000 | MOSFET N-CH 600V 47A TO-3... |
FCA47N60F_SN00171 | ON Semicondu... | 0.0 $ | 1000 | MOSFET N-CH TO-3PNN-Chann... |
FCA47N60F | ON Semicondu... | -- | 598 | MOSFET N-CH 600V 47A TO-3... |
FCA4100RJ | TE Connectiv... | 0.1 $ | 1000 | RES 100 OHM 4W 5% RADIAL1... |
FCA41K0K | TE Connectiv... | 0.1 $ | 1000 | RES 1.00K OHM 4W 10% RADI... |
FCA4270RJ | TE Connectiv... | 0.1 $ | 1000 | RES 270 OHM 4W 5% RADIAL2... |
FCA4330RJ | TE Connectiv... | 0.1 $ | 1000 | RES 330 OHM 4W 5% RADIAL3... |
FCA433RJ | TE Connectiv... | 0.1 $ | 1000 | RES 33.0 OHM 4W 5% RADIAL... |
FCA4R22J | TE Connectiv... | 0.23 $ | 1000 | RES 0.22 OHM 4W 5% RADIAL... |
FCA43K3J | TE Connectiv... | 0.2 $ | 1000 | RES 3.30K OHM 4W 5% RADIA... |
FCA41K5J | TE Connectiv... | 0.2 $ | 1000 | RES 1.50K OHM 4W 5% RADIA... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...