FCR6.0M5T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resonators, vital components in many electronic systems and other high tech applications, are some of the most versatile and indispensible elements found in a wide range of components, circuits, and systems. The FCR6.0M5T application field and working principle is a fine example of this.

The FCR6.0M5T is a high-frequency filter and is used as a resonator filter where the dominant frequency is 6.0MHz and the 7th overtone is 5th from the top of the harmonic cascade. It is used in a variety of applications in which it is important to achieve a high frequency resolution. This can include audio production and broadcasting, communication systems, and industrial, medical and military applications.

The FCR6.0M5T is made of a ceramic material and is electrically symmetrically balanced, which makes it well-suited for use in symmetrical circuits. The filter is used as a substitute for a single-pole filter and is often used in receiver and demodulator applications as well as for generating pulse signals. Because of its multi-frequency capability, the FCR6.0M5T can be used in multiplexer applications to process frequencies between 6 and 7.5 MHz.

The FCR6.0M5T uses a double-pole filter to select the desired frequency. The filter is connected in an analog form in which two parallel inductors are connected in series with a single capacitor. The values of these components are predetermined and form the filter\'s characteristics. The two inductors are used to create a band-pass filter and the capacitor forms a low-pass filter. The filter resonance point is set by the ratio of the inductors and capacitor.

As mentioned previously, the FCR6.0M5T is a high-frequency filter. This means that it can only accept signals that have higher frequencies than the filter\'s dominant frequency. The filter will reject signals at lower frequencies and only allow signals at the desired frequency and its harmonics to pass through. This allows the filter to isolate a particular frequency and its harmonics from a complex signal mixture.

FCR6.0M5T application fields along with its working principle make it a very useful device in a variety of applications. It is used to filter out unwanted frequencies in audio and communication systems, as well as to isolate certain frequencies in industry, medical, and military applications. It is also used in multiplexer applications to process frequencies between 6 and 7.5 MHz. The device is composed of two parallel inductors and a single capacitor, which regulate the filter resonance point. As a high-frequency filter, the FCR6.0M5T is able to reject signals at lower frequencies and only allow those at the desired frequency and its harmonics to pass through.

The specific data is subject to PDF, and the above content is for reference